kernel: Refresh on 5.10.138

Refresh all patches on top of kernel 5.10.138.

The following patches were applied upstream:
 bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch
 bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch
 bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch
 bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch
 bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch
 bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch
 bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch

Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more.
 bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch

Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138")
Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 62 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch b/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
deleted file mode 100644
index d9aa857856..0000000000
--- a/target/linux/bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From aa5ba5fd06cffacf4831fe6e9aef65081287924e Mon Sep 17 00:00:00 2001
-From: Dom Cobley <popcornmix@gmail.com>
-Date: Mon, 15 Mar 2021 13:28:06 +0000
-Subject: [PATCH] vc4/drm: vc4_plane: Remove subpixel positioning check
-
-There is little harm in ignoring fractional coordinates
-(they just get truncated).
-
-Without this:
-modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24
-
-is rejected. We have the same issue in Kodi when trying to
-use zoom options on video.
-
-Note: even if all coordinates are fully integer. e.g.
-src:[0,0,1920,1080] dest:[-10,-10,1940,1100]
-
-it will still get rejected as drm_atomic_helper_check_plane_state
-uses drm_rect_clip_scaled which transforms this to fractional src coords
-
-Signed-off-by: Dom Cobley <popcornmix@gmail.com>
----
- drivers/gpu/drm/vc4/vc4_plane.c | 21 ++++++++-------------
- 1 file changed, 8 insertions(+), 13 deletions(-)
-
---- a/drivers/gpu/drm/vc4/vc4_plane.c
-+++ b/drivers/gpu/drm/vc4/vc4_plane.c
-@@ -339,7 +339,6 @@ static int vc4_plane_setup_clipping_and_
- 	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
- 	struct drm_framebuffer *fb = state->fb;
- 	struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
--	u32 subpixel_src_mask = (1 << 16) - 1;
- 	int num_planes = fb->format->num_planes;
- 	struct drm_crtc_state *crtc_state;
- 	u32 h_subsample = fb->format->hsub;
-@@ -361,18 +360,14 @@ static int vc4_plane_setup_clipping_and_
- 	for (i = 0; i < num_planes; i++)
- 		vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
- 
--	/* We don't support subpixel source positioning for scaling. */
--	if ((state->src.x1 & subpixel_src_mask) ||
--	    (state->src.x2 & subpixel_src_mask) ||
--	    (state->src.y1 & subpixel_src_mask) ||
--	    (state->src.y2 & subpixel_src_mask)) {
--		return -EINVAL;
--	}
--
--	vc4_state->src_x = state->src.x1 >> 16;
--	vc4_state->src_y = state->src.y1 >> 16;
--	vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16;
--	vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16;
-+	/* We don't support subpixel source positioning for scaling,
-+	 * but fractional coordinates can be generated by clipping
-+	 * so just round for now
-+	 */
-+	vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1<<16);
-+	vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1<<16);
-+	vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1<<16) - vc4_state->src_x;
-+	vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1<<16) - vc4_state->src_y;
- 
- 	vc4_state->crtc_x = state->dst.x1;
- 	vc4_state->crtc_y = state->dst.y1;