bcm27xx: add kernel 5.10 support

Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 51 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-5.10/950-0153-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch b/target/linux/bcm27xx/patches-5.10/950-0153-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch
new file mode 100644
index 0000000000..5f446dcc2f
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.10/950-0153-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch
@@ -0,0 +1,51 @@
+From 5d5a886b8ae7d18e6aeb44acd37fc4bd23ca1952 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Fri, 9 Aug 2019 08:51:43 +0100
+Subject: [PATCH] net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
+
+Some combinations of Pi 4Bs and Ethernet switches don't reliably get a
+DCHP-assigned IP address, leaving the unit with a self=assigned 169.254
+address. In the failure case, the Pi is left able to receive packets
+but not send them, suggesting that the MAC<->PHY link is getting into
+a bad state.
+
+It has been found empirically that skipping a reset step by the genet
+driver prevents the failures. No downsides have been discovered yet,
+and unlike the forced renegotiation it doesn't increase the time to
+get an IP address, so the workaround is enabled by default; add
+
+  genet.skip_umac_reset=n
+
+to the command line to disable it.
+
+See: https://github.com/raspberrypi/linux/issues/3108
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
++++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+@@ -67,6 +67,9 @@
+ 
+ /* Forward declarations */
+ static void bcmgenet_set_rx_mode(struct net_device *dev);
++static bool skip_umac_reset = true;
++module_param(skip_umac_reset, bool, 0444);
++MODULE_PARM_DESC(skip_umac_reset, "Skip UMAC reset step");
+ 
+ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
+ {
+@@ -2426,6 +2429,11 @@ static void reset_umac(struct bcmgenet_p
+ 	bcmgenet_rbuf_ctrl_set(priv, 0);
+ 	udelay(10);
+ 
++	if (skip_umac_reset) {
++		pr_warn("Skipping UMAC reset\n");
++		return;
++	}
++
+ 	/* issue soft reset and disable MAC while updating its registers */
+ 	bcmgenet_umac_writel(priv, CMD_SW_RESET, UMAC_CMD);
+ 	udelay(2);