diff options
author | Kyoungkyu Park <choryu.park@choryu.space> | 2021-11-14 01:03:24 +0900 |
---|---|---|
committer | Sungbo Eo <mans0n@gorani.run> | 2021-12-12 20:33:19 +0900 |
commit | 9a1b9a42b793104bd65bfd292d4935b061d5da33 (patch) | |
tree | adc9bb19297779557b59b8c86dca80e30b8fe9cc /target/linux/bcm27xx/patches-5.10/950-0040-Add-dwc_otg-driver.patch | |
parent | 91e37b60a0b1181b77aabf7269450bf76d220c40 (diff) | |
download | upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.tar.gz upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.tar.bz2 upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.zip |
ramips: add support for HUMAX E10
HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router,
based on MediaTek MT7621A.
Specifications:
- SoC: MT7621A
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB (MXIC MX25L12805D)
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 2x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x USB 2.0 Type-A
- UART: J1 (57600 8N1)
- pinout: [3V3] (RXD) (GND) (TXD)
Installation via web interface:
- Flash **factory** image through the stock web interface.
Recovery procedure:
1. Connect ethernet cable between Router **LAN** port and PC Ethernet port.
2. Set your computer to a static IP **192.168.1.1**
3. Turn the device off and wait a few seconds. Hold the WPS button on front
of device and insert power.
4. Send a firmware image to **192.168.1.6** using TFTP.
You can use any TFTP client. (tftp, curl, Tftpd64...)
- It can accept both images which is
HUMAX stock firmware dump (0x70000-0x1000000) image
and OpenWRT **sysupgrade** image.
Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>
[remove trailing whitespace]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0040-Add-dwc_otg-driver.patch')
0 files changed, 0 insertions, 0 deletions