brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 61 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch b/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
new file mode 100644
index 0000000000..e63d4c6bc1
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
@@ -0,0 +1,61 @@
+From 1738aaf187e0c8e97fbdd9661960b835f45e8985 Mon Sep 17 00:00:00 2001
+From: Zahari Petkov <zahari@balena.io>
+Date: Mon, 18 Nov 2019 23:02:55 +0200
+Subject: [PATCH] leds: pca963x: Fix open-drain initialization
+
+commit 697529091ac7a0a90ca349b914bb30641c13c753 upstream.
+
+Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
+polarity") Mode register 2 was initialized directly with either 0x01
+or 0x05 for open-drain or totem pole (push-pull) configuration.
+
+Afterwards, MODE2 initialization started using bitwise operations on
+top of the default MODE2 register value (0x05). Using bitwise OR for
+setting OUTDRV with 0x01 and 0x05 does not produce correct results.
+When open-drain is used, instead of setting OUTDRV to 0, the driver
+keeps it as 1:
+
+Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
+Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)
+
+Now OUTDRV setting uses correct bitwise operations for initialization:
+
+Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
+Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)
+
+Additional MODE2 register definitions are introduced now as well.
+
+Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
+Signed-off-by: Zahari Petkov <zahari@balena.io>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/leds-pca963x.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/drivers/leds/leds-pca963x.c
++++ b/drivers/leds/leds-pca963x.c
+@@ -43,6 +43,8 @@
+ #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
+ #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
+ 
++#define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
++#define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
+ #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
+ 
+ #define PCA963X_MODE1		0x00
+@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_clie
+ 						    PCA963X_MODE2);
+ 		/* Configure output: open-drain or totem pole (push-pull) */
+ 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
+-			mode2 |= 0x01;
++			mode2 &= ~PCA963X_MODE2_OUTDRV;
+ 		else
+-			mode2 |= 0x05;
++			mode2 |= PCA963X_MODE2_OUTDRV;
+ 		/* Configure direction: normal or inverted */
+ 		if (pdata->dir == PCA963X_INVERTED)
+-			mode2 |= 0x10;
++			mode2 |= PCA963X_MODE2_INVRT;
+ 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
+ 					  mode2);
+ 	}