brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 28 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0711-ARM-dts-bcm2835-rpi-zero-w-Fix-bus-width-of-sdhci.patch b/target/linux/bcm27xx/patches-4.19/950-0711-ARM-dts-bcm2835-rpi-zero-w-Fix-bus-width-of-sdhci.patch
new file mode 100644
index 0000000000..06dd01329f
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0711-ARM-dts-bcm2835-rpi-zero-w-Fix-bus-width-of-sdhci.patch
@@ -0,0 +1,28 @@
+From c60d699be1eb26a14157cfa5b1ac0cf8afce0dcb Mon Sep 17 00:00:00 2001
+From: Stefan Wahren <wahrenst@gmx.net>
+Date: Mon, 23 Sep 2019 19:41:33 +0200
+Subject: [PATCH] ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
+
+The commit e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at
+board level") accidently dropped the bus width for the sdhci on the
+RPi Zero W, because the board file was relying on the defaults
+from bcm2835-rpi.dtsi. So fix this performance regression by adding
+the bus width to the board file.
+
+Fixes: e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at board level")
+Reported-by: Phil Elwell <phil@raspberrypi.org>
+Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
+---
+ arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+@@ -119,6 +119,7 @@
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+ 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
++	bus-width = <4>;
+ 	mmc-pwrseq = <&wifi_pwrseq>;
+ 	non-removable;
+ 	status = "okay";