brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 51 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0579-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch b/target/linux/bcm27xx/patches-4.19/950-0579-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch
new file mode 100644
index 0000000000..808fdaf0ca
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0579-staging-vchiq-Use-the-old-dma-controller-for-OF-conf.patch
@@ -0,0 +1,51 @@
+From 65a5b304668ed6cb4568ac1a0ffbeabb28208b38 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.org>
+Date: Tue, 18 Jun 2019 12:15:50 +0100
+Subject: [PATCH] staging: vchiq: Use the old dma controller for OF
+ config on platform devices
+
+vchiq on Pi4 is no longer under the soc node, therefore it
+doesn't get the dma-ranges for the VPU.
+
+Switch to using the configuration of the old dma controller as
+that will set the dma-ranges correctly.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
+---
+ .../interface/vchiq_arm/vchiq_arm.c             | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+@@ -3599,6 +3599,7 @@ vchiq_register_child(struct platform_dev
+ {
+ 	struct platform_device_info pdevinfo;
+ 	struct platform_device *new_dev;
++	struct device_node *np;
+ 
+ 	memset(&pdevinfo, 0, sizeof(pdevinfo));
+ 
+@@ -3612,10 +3613,20 @@ vchiq_register_child(struct platform_dev
+ 		return NULL;
+ 
+ 	/*
+-	 * We want the dma-ranges etc to be copied from the parent VCHIQ device
+-	 * to be passed on to the children too.
++	 * We want the dma-ranges etc to be copied from a device with the
++	 * correct dma-ranges for the VPU.
++	 * VCHIQ on Pi4 is now under scb which doesn't get those dma-ranges.
++	 * Take the "dma" node as going to be suitable as it sees the world
++	 * through the same eyes as the VPU.
+ 	 */
+-	of_dma_configure(&new_dev->dev, pdev->dev.of_node, true);
++	np = of_find_node_by_path("dma");
++	if (!np)
++		np = pdev->dev.of_node;
++
++	of_dma_configure(&new_dev->dev, np, true);
++
++	if (np != pdev->dev.of_node)
++		of_node_put(np);
+ 
+ 	return new_dev;
+ }