brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 80 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0560-overlays-Add-the-spi-gpio40-45-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0560-overlays-Add-the-spi-gpio40-45-overlay.patch
new file mode 100644
index 0000000000..26930baadd
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0560-overlays-Add-the-spi-gpio40-45-overlay.patch
@@ -0,0 +1,80 @@
+From 726da40b8c272d181a41686195f91b914363167b Mon Sep 17 00:00:00 2001
+From: Tim Gover <tim.gover@raspberrypi.org>
+Date: Tue, 22 Jan 2019 10:49:41 +0000
+Subject: [PATCH] overlays: Add the spi-gpio40-45 overlay
+
+The 2711 B0 boot EEPROM is programmed via SPI0 on GPIO
+pins 40-43 CS0. Add a device tree overlay to optionally
+change the SPI0 pinmux from the external GPIO pins to
+the boot EEPROM pins.
+---
+ arch/arm/boot/dts/overlays/Makefile           |  1 +
+ arch/arm/boot/dts/overlays/README             |  6 ++++
+ .../dts/overlays/spi-gpio40-45-overlay.dts    | 36 +++++++++++++++++++
+ 3 files changed, 43 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 	smi-dev.dtbo \
+ 	smi-nand.dtbo \
+ 	spi-gpio35-39.dtbo \
++	spi-gpio40-45.dtbo \
+ 	spi-rtc.dtbo \
+ 	spi0-cs.dtbo \
+ 	spi0-hw-cs.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1967,6 +1967,12 @@ Load:   dtoverlay=spi-gpio35-39
+ Params: <None>
+ 
+ 
++Name:   spi-gpio40-45
++Info:   Move SPI function block to GPIOs 40 to 45
++Load:   dtoverlay=spi-gpio40-45
++Params: <None>
++
++
+ Name:   spi-rtc
+ Info:   Adds support for a number of SPI Real Time Clock devices
+ Load:   dtoverlay=spi-rtc,<param>=<val>
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts
+@@ -0,0 +1,36 @@
++/*
++ * Boot EEPROM overlay
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++	compatible = "brcm,bcm2835";
++
++	fragment@0 {
++		target = <&spi0>;
++		__overlay__ {
++			cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>;
++			status = "okay";
++		};
++	};
++
++	fragment@1 {
++		target = <&spi0_cs_pins>;
++		__overlay__ {
++			brcm,pins = <45 44 43>;
++			brcm,function = <1>; /* output */
++			status = "okay";
++		};
++	};
++
++	fragment@2 {
++		target = <&spi0_pins>;
++		__overlay__ {
++			brcm,pins = <40 41 42>;
++			brcm,function = <3>; /* alt4 */
++			status = "okay";
++		};
++	};
++};