brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 45 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0450-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch b/target/linux/bcm27xx/patches-4.19/950-0450-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch
new file mode 100644
index 0000000000..84a691343f
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0450-ARM-bcm283x-Extend-the-WDT-DT-node-out-to-cover-the-.patch
@@ -0,0 +1,45 @@
+From 9f889edf282d1d9a21c921e6cd33cebe22bcc4d4 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 12 Dec 2018 15:51:49 -0800
+Subject: [PATCH] ARM: bcm283x: Extend the WDT DT node out to cover the
+ whole PM block. (v4)
+
+It was covering part of the PM block's range, up to the WDT regs.  To
+support the rest of the PM block's functionality, we need the full
+register range plus the AXI Async Bridge regs for PM sequencing.
+
+This doesn't convert any of the consumers over to the new binding yet,
+since we will need to be careful in coordinating our usage of firmware
+services that might power domains on and off versus the bcm2835-pm
+driver's access of those same domains.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+(cherry picked from commit 29abc92c1d93e28a8f4d55e6343eec4faf44025a)
+---
+ arch/arm/boot/dts/bcm283x.dtsi | 13 +++++++++++--
+ 1 file changed, 11 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -121,8 +121,17 @@
+ 		};
+ 
+ 		watchdog@7e100000 {
+-			compatible = "brcm,bcm2835-pm-wdt";
+-			reg = <0x7e100000 0x28>;
++			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
++			#power-domain-cells = <1>;
++			#reset-cells = <1>;
++			reg = <0x7e100000 0x114>,
++			      <0x7e00a000 0x24>;
++			clocks = <&clocks BCM2835_CLOCK_V3D>,
++				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
++				 <&clocks BCM2835_CLOCK_H264>,
++				 <&clocks BCM2835_CLOCK_ISP>;
++			clock-names = "v3d", "peri_image", "h264", "isp";
++			system-power-controller;
+ 		};
+ 
+ 		clocks: cprman@7e101000 {