brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 126 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0435-overlays-Update-upstream-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0435-overlays-Update-upstream-overlay.patch
new file mode 100644
index 0000000000..45476681e1
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0435-overlays-Update-upstream-overlay.patch
@@ -0,0 +1,126 @@
+From 61c487e6a1985e52307d6df5834b610a50219819 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Wed, 22 May 2019 13:29:56 +0100
+Subject: [PATCH] overlays: Update upstream overlay
+
+The recent DT/overlay changes have had a corresponding effect on the
+upstream overlay, which is a composite of the vc4-kms-v3d and dwc2
+overlays.
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ .../boot/dts/overlays/upstream-overlay.dts    | 41 ++-----------------
+ 1 file changed, 3 insertions(+), 38 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts
++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts
+@@ -52,42 +52,36 @@
+ 	fragment@7 {
+ 		target = <&pixelvalve0>;
+ 		__overlay__ {
+-			interrupts = <2 13>;
+ 			status = "okay";
+ 		};
+ 	};
+ 	fragment@8 {
+ 		target = <&pixelvalve1>;
+ 		__overlay__ {
+-			interrupts = <2 14>;
+ 			status = "okay";
+ 		};
+ 	};
+ 	fragment@9 {
+ 		target = <&pixelvalve2>;
+ 		__overlay__ {
+-			interrupts = <2 10>;
+ 			status = "okay";
+ 		};
+ 	};
+ 	fragment@10 {
+ 		target = <&hvs>;
+ 		__overlay__ {
+-			interrupts = <2 1>;
+ 			status = "okay";
+ 		};
+ 	};
+ 	fragment@11 {
+ 		target = <&hdmi>;
+ 		__overlay__ {
+-			interrupts = <2 8>, <2 9>;
+ 			status = "okay";
+ 		};
+ 	};
+ 	fragment@12 {
+ 		target = <&v3d>;
+ 		__overlay__ {
+-			interrupts = <1 10>;
+ 			status = "okay";
+ 		};
+ 	};
+@@ -98,37 +92,29 @@
+ 		};
+ 	};
+ 	fragment@14 {
+-		target-path = "/soc/dma";
+-		__overlay__ {
+-			brcm,dma-channel-mask = <0x7f35>;
+-		};
+-	};
+-	fragment@15 {
+ 		target = <&clocks>;
+ 		__overlay__ {
+ 			claim-clocks = <BCM2835_PLLD_DSI0 BCM2835_PLLD_DSI1 BCM2835_PLLH_AUX BCM2835_PLLH_PIX>;
+ 		};
+ 	};
+-	fragment@16 {
++	fragment@15 {
+ 		target = <&vec>;
+ 		__overlay__ {
+ 			status = "okay";
+ 		};
+ 	};
+-	fragment@17 {
++	fragment@16 {
+ 		target = <&txp>;
+ 		__overlay__ {
+ 			status = "okay";
+ 		};
+ 	};
+-	fragment@18 {
++	fragment@17 {
+ 		target = <&usb>;
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		dwc2_usb: __overlay__ {
+ 			compatible = "brcm,bcm2835-usb";
+-			reg = <0x7e980000 0x10000>;
+-			interrupts = <1 9>;
+ 			dr_mode = "otg";
+ 			g-np-tx-fifo-size = <32>;
+ 			g-rx-fifo-size = <256>;
+@@ -136,25 +122,4 @@
+ 			status = "okay";
+ 		};
+ 	};
+-	fragment@19 {
+-		target = <&uart1>;
+-		__overlay__ {
+-			interrupt-parent = <&intc>;
+-			interrupts = <0x1 0x1d>;
+-		};
+-	};
+-	fragment@20 {
+-		target = <&spi1>;
+-		__overlay__ {
+-			interrupt-parent = <&intc>;
+-			interrupts = <0x1 0x1d>;
+-		};
+-	};
+-	fragment@21 {
+-		target = <&spi2>;
+-		__overlay__ {
+-			interrupt-parent = <&intc>;
+-			interrupts = <0x1 0x1d>;
+-		};
+-	};
+ };