brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 179 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0134-overlays-Fix-a-few-dtc-warnings.patch b/target/linux/bcm27xx/patches-4.19/950-0134-overlays-Fix-a-few-dtc-warnings.patch
new file mode 100644
index 0000000000..b4c4f5aab4
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0134-overlays-Fix-a-few-dtc-warnings.patch
@@ -0,0 +1,179 @@
+From 13abcbfdc76f1a40c36367fe28b76e29742b2d05 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Mon, 8 Oct 2018 17:16:28 +0100
+Subject: [PATCH] overlays: Fix a few dtc warnings
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ .../overlays/pitft28-resistive-overlay.dts    |  2 --
+ .../overlays/pitft35-resistive-overlay.dts    |  2 --
+ .../arm/boot/dts/overlays/qca7000-overlay.dts | 13 ++++++----
+ .../overlays/rpi-cirrus-wm5102-overlay.dts    | 26 ++++++++++++-------
+ arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 11 +++++---
+ .../boot/dts/overlays/smi-nand-overlay.dts    |  3 ---
+ .../boot/dts/overlays/tinylcd35-overlay.dts   |  2 --
+ 7 files changed, 31 insertions(+), 28 deletions(-)
+
+--- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts
++++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts
+@@ -64,8 +64,6 @@
+ 			};
+ 
+ 			pitft_ts@1 {
+-				#address-cells = <1>;
+-				#size-cells = <0>;
+ 				compatible = "st,stmpe610";
+ 				reg = <1>;
+ 
+--- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts
++++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts
+@@ -64,8 +64,6 @@
+ 			};
+ 
+ 			pitft_ts@1 {
+-				#address-cells = <1>;
+-				#size-cells = <0>;
+ 				compatible = "st,stmpe610";
+ 				reg = <1>;
+ 
+--- a/arch/arm/boot/dts/overlays/qca7000-overlay.dts
++++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts
+@@ -8,6 +8,13 @@
+ 	compatible = "brcm,bcm2708";
+ 
+ 	fragment@0 {
++		target = <&spidev0>;
++		__overlay__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@1 {
+ 		target = <&spi0>;
+ 		__overlay__ {
+ 			/* needed to avoid dtc warning */
+@@ -16,10 +23,6 @@
+ 
+ 			status = "okay";
+ 
+-			spidev@0 {
+-				status = "disabled";
+-			};
+-
+ 			eth1: qca7000@0 {
+ 				compatible = "qca,qca7000";
+ 				reg = <0>; /* CE0 */
+@@ -33,7 +36,7 @@
+ 		};
+ 	};
+ 
+-	fragment@1 {
++	fragment@2 {
+ 		target = <&gpio>;
+ 		__overlay__ {
+ 			eth1_pins: eth1_pins {
+--- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
++++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
+@@ -44,20 +44,26 @@
+ 	};
+ 
+ 	fragment@3 {
++		target = <&spidev0>;
++		__overlay__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@4 {
++		target = <&spidev1>;
++		__overlay__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@5 {
+ 		target = <&spi0>;
+ 		__overlay__ {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			status = "okay";
+ 
+-			spidev@0{
+-				status = "disabled";
+-			};
+-
+-			spidev@1{
+-				status = "disabled";
+-			};
+-
+ 			wm5102@1{
+ 				compatible = "wlf,wm5102";
+ 				reg = <1>;
+@@ -117,7 +123,7 @@
+ 		};
+ 	};
+ 
+-	fragment@4 {
++	fragment@6 {
+ 		target = <&i2c1>;
+ 		__overlay__ {
+ 			status = "okay";
+@@ -135,7 +141,7 @@
+ 		};
+ 	};
+ 
+-	fragment@5 {
++	fragment@7 {
+ 		target = <&sound>;
+ 		__overlay__ {
+ 			compatible = "wlf,rpi-cirrus";
+--- a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts
++++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts
+@@ -7,6 +7,13 @@
+ 	compatible = "brcm,bcm2708", "brcm,bcm2709";
+ 
+ 	fragment@0 {
++		target = <&spidev0>;
++		__overlay__ {
++			status = "disabled";
++		};
++	};
++
++	fragment@1 {
+ 		target = <&spi0>;
+ 		__overlay__ {
+ 			/* needed to avoid dtc warning */
+@@ -15,10 +22,6 @@
+ 
+ 			status = "okay";
+ 
+-			spidev@0 {
+-				status = "disabled";
+-			};
+-
+ 			cxd2880@0 {
+ 				compatible = "sony,cxd2880";
+ 				reg = <0>; /* CE0 */
+--- a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts
++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts
+@@ -20,9 +20,6 @@
+ 	fragment@1 {
+ 		target = <&soc>;
+ 		__overlay__ {
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-
+ 			nand: flash@0 {
+ 				compatible = "brcm,bcm2835-smi-nand";
+ 				smi_handle = <&smi>;
+--- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts
+@@ -171,8 +171,6 @@
+ 		__overlay__ {
+ 			keypad: keypad {
+ 				compatible = "gpio-keys";
+-				#address-cells = <1>;
+-				#size-cells = <0>;
+ 				pinctrl-names = "default";
+ 				pinctrl-0 = <&keypad_pins>;
+ 				status = "disabled";