brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 38 insertions, 0 deletions

diff --git a/target/linux/bcm27xx/patches-4.19/950-0025-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/bcm27xx/patches-4.19/950-0025-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
new file mode 100644
index 0000000000..2df0d37b8d
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0025-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -0,0 +1,38 @@
+From 6272fd1e55945522b156a28c1f605b69ae6e05b7 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Mon, 9 May 2016 17:28:18 -0700
+Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as
+ critical.
+
+These divide off of PLLD_PER and are used for the ethernet and wifi
+PHYs source PLLs.  Neither of them is currently represented by a phy
+device that would grab the clock for us.
+
+This keeps other drivers from killing the networking PHYs when they
+disable their own clocks and trigger PLLD_PER's refcount going to 0.
+
+v2: Skip marking as critical if they aren't on at boot.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1454,6 +1454,15 @@ static struct clk_hw *bcm2835_register_c
+ 	init.flags = data->flags | CLK_IGNORE_UNUSED;
+ 
+ 	/*
++	 * Some GPIO clocks for ethernet/wifi PLLs are marked as
++	 * critical (since some platforms use them), but if the
++	 * firmware didn't have them turned on then they clearly
++	 * aren't actually critical.
++	 */
++	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
++		init.flags &= ~CLK_IS_CRITICAL;
++
++	/*
+ 	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
+ 	 * rate changes on at least of the parents.
+ 	 */