strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

10 files changed, 667 insertions, 0 deletions

diff --git a/target/linux/au1000/patches/001-au1x00_gpio.patch b/target/linux/au1000/patches/001-au1x00_gpio.patch
new file mode 100644
index 0000000000..d4339aec46
--- /dev/null
+++ b/target/linux/au1000/patches/001-au1x00_gpio.patch
@@ -0,0 +1,294 @@
+diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
+--- linux-2.6.21.1/arch/mips/au1000/common/gpio.c	2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c	2007-05-22 21:41:55.000000000 +0200
+@@ -1,4 +1,7 @@
+ /*
++ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
++ *  	Architecture specific GPIO support
++ *
+  *  This program is free software; you can redistribute	 it and/or modify it
+  *  under  the terms of	 the GNU General  Public License as published by the
+  *  Free Software Foundation;  either version 2 of the	License, or (at your
+@@ -18,101 +21,133 @@
+  *  You should have received a copy of the  GNU General Public License along
+  *  with this program; if not, write  to the Free Software Foundation, Inc.,
+  *  675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *  Notes :
++ * 	au1000 SoC have only one GPIO line : GPIO1
++ * 	others have a second one : GPIO2
+  */
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/types.h>
+ #include <linux/module.h>
+-#include <au1000.h>
+-#include <au1xxx_gpio.h>
++
++#include <asm/addrspace.h>
++#include <asm/io.h>
++
++#include <asm/mach-au1x00/au1000.h>
++#include <asm/gpio.h>
+ 
+ #define gpio1 sys
+ #if !defined(CONFIG_SOC_AU1000)
+ static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
++#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
+ 
+-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+-
+-int au1xxx_gpio2_read(int signal)
++static int au1xxx_gpio2_read(unsigned gpio)
+ {
+-	signal -= 200;
+-/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
+-	return ((gpio2->pinstate >> signal) & 0x01);
++	gpio -= AU1XXX_GPIO_BASE;
++	return ((gpio2->pinstate >> gpio) & 0x01);
+ }
+ 
+-void au1xxx_gpio2_write(int signal, int value)
++static void au1xxx_gpio2_write(unsigned gpio, int value)
+ {
+-	signal -= 200;
++	gpio -= AU1XXX_GPIO_BASE;
+ 
+-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+-		(value << signal);
++	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
++	                (value << gpio);
+ }
+ 
+-void au1xxx_gpio2_tristate(int signal)
++static int au1xxx_gpio2_direction_input(unsigned gpio)
+ {
+-	signal -= 200;
+-	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
++	gpio -= AU1XXX_GPIO_BASE;
++	gpio2->dir &= ~(0x01 << gpio);
++	return 0;
+ }
+-#endif
+ 
+-int au1xxx_gpio1_read(int signal)
++static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
++{
++	gpio -= AU1XXX_GPIO_BASE;
++	gpio2->dir = (0x01 << gpio) | (value << gpio);
++	return 0;
++}
++
++#endif /* !defined(CONFIG_SOC_AU1000) */
++
++static int au1xxx_gpio1_read(unsigned gpio)
+ {
+-/*	gpio1->trioutclr |= (0x01 << signal); */
+-	return ((gpio1->pinstaterd >> signal) & 0x01);
++	return ((gpio1->pinstaterd >> gpio) & 0x01);
+ }
+ 
+-void au1xxx_gpio1_write(int signal, int value)
++static void au1xxx_gpio1_write(unsigned gpio, int value)
+ {
+ 	if(value)
+-		gpio1->outputset = (0x01 << signal);
++		gpio1->outputset = (0x01 << gpio);
+ 	else
+-		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
++		/* Output a zero */
++		gpio1->outputclr = (0x01 << gpio);
+ }
+ 
+-void au1xxx_gpio1_tristate(int signal)
++static int au1xxx_gpio1_direction_input(unsigned gpio)
+ {
+-	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
++	gpio1->pininputen = (0x01 << gpio);
++	return 0;
+ }
+ 
++static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
++{
++	gpio1->trioutclr = (0x01 & gpio);
++	return 0;
++}
+ 
+-int au1xxx_gpio_read(int signal)
++int au1xxx_gpio_get_value(unsigned gpio)
+ {
+-	if(signal >= 200)
++	if(gpio >= AU1XXX_GPIO_BASE)
+ #if defined(CONFIG_SOC_AU1000)
+ 		return 0;
+ #else
+-		return au1xxx_gpio2_read(signal);
++		return au1xxx_gpio2_read(gpio);
+ #endif
+ 	else
+-		return au1xxx_gpio1_read(signal);
++		return au1xxx_gpio1_read(gpio);
+ }
+ 
+-void au1xxx_gpio_write(int signal, int value)
++void au1xxx_gpio_set_value(unsigned gpio, int value)
+ {
+-	if(signal >= 200)
++	if(gpio >= AU1XXX_GPIO_BASE)
+ #if defined(CONFIG_SOC_AU1000)
+ 		;
+ #else
+-		au1xxx_gpio2_write(signal, value);
++		au1xxx_gpio2_write(gpio, value);
+ #endif
+ 	else
+-		au1xxx_gpio1_write(signal, value);
++		au1xxx_gpio1_write(gpio, value);
+ }
+ 
+-void au1xxx_gpio_tristate(int signal)
++int au1xxx_gpio_direction_input(unsigned gpio)
+ {
+-	if(signal >= 200)
++	if (gpio >= AU1XXX_GPIO_BASE)
+ #if defined(CONFIG_SOC_AU1000)
+ 		;
+ #else
+-		au1xxx_gpio2_tristate(signal);
++		return au1xxx_gpio2_direction_input(gpio);
+ #endif
+ 	else
+-		au1xxx_gpio1_tristate(signal);
++		return au1xxx_gpio1_direction_input(gpio);
+ }
+ 
+-void au1xxx_gpio1_set_inputs(void)
++int au1xxx_gpio_direction_output(unsigned gpio, int value)
+ {
+-	gpio1->pininputen = 0;
++	if (gpio >= AU1XXX_GPIO_BASE)
++#if defined(CONFIG_SOC_AU1000)
++		;
++#else
++		return au1xxx_gpio2_direction_output(gpio, value);
++#endif
++	else
++		return au1xxx_gpio1_direction_output(gpio, value);
+ }
+ 
+-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+-EXPORT_SYMBOL(au1xxx_gpio_tristate);
+-EXPORT_SYMBOL(au1xxx_gpio_write);
+-EXPORT_SYMBOL(au1xxx_gpio_read);
++EXPORT_SYMBOL(au1xxx_gpio_direction_output);
++EXPORT_SYMBOL(au1xxx_gpio_direction_input);
++EXPORT_SYMBOL(au1xxx_gpio_get_value);
++EXPORT_SYMBOL(au1xxx_gpio_set_value);
+--- linux-2.6.21.1/arch/mips/Kconfig	2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1.new/arch/mips/Kconfig	2007-05-21 08:04:42.000000000 +0200
+@@ -1044,6 +1044,7 @@
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_APM_EMULATION
+ 	select SYS_SUPPORTS_KGDB
++	select GENERIC_GPIO
+ 
+ config PNX8550
+ 	bool
+diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
+--- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h	1970-01-01 01:00:00.000000000 +0100
+@@ -1,20 +0,0 @@
+-#ifndef __AU1XXX_GPIO_H
+-#define __AU1XXX_GPIO_H
+-
+-void au1xxx_gpio1_set_inputs(void);
+-void au1xxx_gpio_tristate(int signal);
+-void au1xxx_gpio_write(int signal, int value);
+-int  au1xxx_gpio_read(int signal);
+-
+-typedef volatile struct
+-{
+-	u32 dir;
+-	u32 reserved;
+-	u32 output;
+-	u32 pinstate;
+-	u32 inten;
+-	u32 enable;
+-
+-} AU1X00_GPIO2;
+-
+-#endif //__AU1XXX_GPIO_H
+diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
+--- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h	2007-05-21 01:10:22.000000000 +0200
+@@ -0,0 +1,69 @@
++#ifndef _AU1XXX_GPIO_H_
++#define _AU1XXX_GPIO_H_
++
++#define AU1XXX_GPIO_BASE	200
++
++typedef volatile struct
++{
++	u32 dir;
++	u32 reserved;
++	u32 output;
++	u32 pinstate;
++	u32 inten;
++	u32 enable;
++
++} AU1X00_GPIO2;
++
++extern int au1xxx_gpio_get_value(unsigned gpio);
++extern void au1xxx_gpio_set_value(unsigned gpio, int value);
++extern int au1xxx_gpio_direction_input(unsigned gpio);
++extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
++
++
++/* Wrappers for the arch-neutral GPIO API */
++
++static inline int gpio_request(unsigned gpio, const char *label)
++{
++	/* Not yet implemented */
++	return 0;
++}
++
++static inline void gpio_free(unsigned gpio)
++{
++	/* Not yet implemented */
++}
++
++static inline int gpio_direction_input(unsigned gpio)
++{
++	return au1xxx_gpio_direction_input(gpio);
++}
++
++static inline int gpio_direction_output(unsigned gpio, int value)
++{
++	return au1xxx_gpio_direction_output(gpio, value);
++}
++
++static inline int gpio_get_value(unsigned gpio)
++{
++	return au1xxx_gpio_get_value(gpio);
++}
++
++static inline void gpio_set_value(unsigned gpio, int value)
++{
++	au1xxx_gpio_set_value(gpio, value);
++}
++
++static inline int gpio_to_irq(unsigned gpio)
++{
++	return gpio;
++}
++
++static inline int irq_to_gpio(unsigned irq)
++{
++	return irq;
++}
++
++/* For cansleep */
++#include <asm-generic/gpio.h>
++
++#endif /* _AU1XXX_GPIO_H_ */
diff --git a/target/linux/au1000/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000/patches/005-au1000_eth_link_beat.patch
new file mode 100644
index 0000000000..946bd84540
--- /dev/null
+++ b/target/linux/au1000/patches/005-au1000_eth_link_beat.patch
@@ -0,0 +1,24 @@
+diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c
+--- linux-2.6.16.7/drivers/net/au1000_eth.c	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/drivers/net/au1000_eth.c	2006-04-23 01:42:48.000000000 +0200
+@@ -12,6 +12,9 @@
+  * Author: MontaVista Software, Inc.
+  *         	ppopov@mvista.com or source@mvista.com
+  *
++ *         Bjoern Riemer 2004
++ *           riemer@fokus.fraunhofer.de or riemer@riemer-nt.de
++ *             // fixed the link beat detection with ioctls (SIOCGMIIPHY)
+  * ########################################################################
+  *
+  *  This program is free software; you can distribute it and/or modify it
+@@ -1672,6 +1675,10 @@
+ 	aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
+ 	control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE;
+ #ifndef CONFIG_CPU_LITTLE_ENDIAN
++	/*riemer: fix for startup without cable */
++	if (!link)
++		dev->flags &= ~IFF_RUNNING;
++
+ 	control |= MAC_BIG_ENDIAN;
+ #endif
+ 	if (link && (dev->if_port == IF_PORT_100BASEFX)) {
diff --git a/target/linux/au1000/patches/006-mtx1_system_button.patch b/target/linux/au1000/patches/006-mtx1_system_button.patch
new file mode 100644
index 0000000000..f4d380c729
--- /dev/null
+++ b/target/linux/au1000/patches/006-mtx1_system_button.patch
@@ -0,0 +1,241 @@
+diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c
+--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c	2006-04-23 11:54:31.000000000 +0200
+@@ -64,6 +64,7 @@
+        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
+        { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
+        { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
++       { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 },
+ };
+ 
+ int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile
+--- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile	2006-04-17 23:53:25.000000000 +0200
++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile	2006-04-23 14:01:36.000000000 +0200
+@@ -8,3 +8,4 @@
+ #
+ 
+ lib-y := init.o board_setup.o irqmap.o
++obj-y := mtx-1_sysbtn.o
+diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c
+--- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	2006-04-23 14:01:17.000000000 +0200
+@@ -0,0 +1,218 @@
++/*
++ *      Driver for the MTX-1 System Button.
++ *
++ *      (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
++ *                              http://www.4g-systems.biz
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ *      Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide
++ *      warranty for any of this software. This material is provided
++ *      "AS-IS" and at no charge.
++ *
++ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
++ *
++ *      Release 0.01.
++ *
++ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
++ *
++ *
++ *      After the module is loaded there is a device /dev/misc/btn
++ *      that can be read. It returns one char '1' if the button
++ *      has been pressed an '0' if it has been released.
++ */
++#include <linux/autoconf.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/poll.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++
++#include <asm/uaccess.h>
++
++#include <asm/mach-au1x00/au1000.h>
++
++
++#ifndef FALSE
++# define FALSE (0)
++#endif
++
++#ifndef TRUE
++# define TRUE (!FALSE)
++#endif
++
++
++//---------[ declarations ]-----------------
++
++
++static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue);
++static char state_changed;
++static char last_value;
++static char is_inuse;
++
++
++//---------[ Hardware Functions ]-----------------
++
++// The MTX-1 Button is attached to GPIO207.
++#define MTX1_GPIO2_SYSBTN (7)
++#define MTX1_SYSBTN_IRQ   (AU1500_GPIO_207)
++
++
++static char mtx1_getbtn (int btnno)
++{
++  if (btnno==0) {
++    return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1;
++  }
++  return 0;
++}
++
++static void mtx1_initbuttons (void)
++{
++  au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR);
++}
++
++
++//---------[ Interrupt handling ]-----------------
++
++
++static void mtx1_btn_interrupt (int irq, void *private)
++{
++	char value = mtx1_getbtn(0);
++	if (last_value != value)
++	{
++		last_value = value;
++		state_changed = 1;
++		wake_up (&mtx1btn_wait_queue);
++	}
++//	kill_fasync(&async_queue, SIGIO, POLL_OUT);
++}
++
++
++static int mtx1_btn_startirq (void)
++{
++	if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) {
++		return 0;
++    }
++	return -1;
++}
++
++static int mtx1_btn_stopirq  (void)
++{
++	free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed);
++	return 0;
++}
++
++
++
++//---------[ File Functions ]-----------------
++
++
++static int mtx1sysbtn_minor = -1;
++
++
++static int mtx1sysbtn_open (struct inode *inode, struct file *file)
++{
++	if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV;
++	if (is_inuse) return -EBUSY;
++	is_inuse=1;
++	last_value = mtx1_getbtn(0);
++	state_changed = 0;
++	return 0;
++}
++
++
++static int mtx1sysbtn_release (struct inode *inode, struct file *file) {
++	if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) {
++		is_inuse=0;
++	}
++	return 0;
++}
++
++
++static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos)
++{
++	if (count < 1)
++		return -EINVAL;
++	if (!state_changed)
++		interruptible_sleep_on (&mtx1btn_wait_queue);
++	state_changed = 0;
++	char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */
++	if(copy_to_user(buf, &c, 1))
++		return -EFAULT;
++	return 1;
++}
++
++
++static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait)
++{
++  unsigned int mask = 0;
++
++  poll_wait (file, &mtx1btn_wait_queue, wait);
++
++  if (state_changed) // state changed since last time.
++    mask |= POLLIN | POLLRDNORM;
++
++  return mask;
++}
++
++
++static struct file_operations mtx1sysbtn_fops = {
++	.owner = THIS_MODULE,
++	.read = mtx1sysbtn_read,
++	.poll = mtx1sysbtn_poll,
++	.open = mtx1sysbtn_open,
++	.release = mtx1sysbtn_release
++};
++
++
++static struct miscdevice mtx1sysbtn_miscdev = {
++	MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ ,
++	"btn",
++	&mtx1sysbtn_fops
++};
++
++
++
++//---------[ Module Functions ]-----------------
++
++
++void __exit exit_mtx1_sysbtn (void)
++{
++	is_inuse = 1;
++	mtx1_btn_stopirq ();
++	misc_deregister(&mtx1sysbtn_miscdev);
++}
++
++
++static int __init init_mtx1_sysbtn (void)
++{
++	printk("MTX-1 System Button driver\n");
++	is_inuse = 1;
++	mtx1_initbuttons ();
++	if (misc_register (&mtx1sysbtn_miscdev) >= 0) {
++		mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor;
++		if (mtx1_btn_startirq () == 0) {
++			is_inuse=0;
++			return 0;
++		}
++		misc_deregister(&mtx1sysbtn_miscdev);
++	}
++	return 1;
++}
++
++module_init(init_mtx1_sysbtn);
++module_exit(exit_mtx1_sysbtn);
++
++MODULE_AUTHOR("Michael Stickel");
++MODULE_DESCRIPTION("Driver for the MTX-1 system button");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/au1000/patches/011-mtx1_leds.patch b/target/linux/au1000/patches/011-mtx1_leds.patch
new file mode 100644
index 0000000000..93c681e964
--- /dev/null
+++ b/target/linux/au1000/patches/011-mtx1_leds.patch
@@ -0,0 +1,28 @@
+diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
+--- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-03-02 13:50:28.000000000 +0100
+@@ -76,6 +76,13 @@
+ 	  This option enables support for the Soekris net4801 and net4826 error
+ 	  LED.
+ 
++config LEDS_MTX1
++	tristate "LED Support for MTX-1 boards"
++	depends on LEDS_CLASS && MIPS_MTX1
++	help
++	  This option enables support for the MTX-1 power and status LED.
++
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
+--- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-24 23:39:18.000000000 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
++obj-$(CONFIG_LEDS_MTX1)			+= leds-mtx1.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/au1000/patches/012-mtx1_cmdline.patch b/target/linux/au1000/patches/012-mtx1_cmdline.patch
new file mode 100644
index 0000000000..8f078428c4
--- /dev/null
+++ b/target/linux/au1000/patches/012-mtx1_cmdline.patch
@@ -0,0 +1,19 @@
+--- linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c.old	2007-04-06 15:01:13.503777992 +0200
++++ linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c	2007-04-06 15:01:36.296313000 +0200
+@@ -39,7 +39,6 @@
+ 
+ int prom_argc;
+ char **prom_argv, **prom_envp;
+-extern void  __init prom_init_cmdline(void);
+ extern char *prom_getenv(char *envname);
+ 
+ const char *get_system_type(void)
+@@ -59,7 +58,7 @@
+ 	mips_machgroup = MACH_GROUP_ALCHEMY;
+ 	mips_machtype = MACH_MTX1;	/* set the platform # */
+ 
+-	prom_init_cmdline();
++	strcpy(arcs_cmdline, CONFIG_CMDLINE);
+ 
+ 	memsize_str = prom_getenv("memsize");
+ 	if (!memsize_str)
diff --git a/target/linux/au1000/patches/013-openwrt_rootfs.patch b/target/linux/au1000/patches/013-openwrt_rootfs.patch
new file mode 100644
index 0000000000..7793161af8
--- /dev/null
+++ b/target/linux/au1000/patches/013-openwrt_rootfs.patch
@@ -0,0 +1,11 @@
+--- linux-2.6.19.2/drivers/mtd/maps/mtx-1_flash.c	2007-07-10 20:56:30.000000000 +0200
++++ linux-2.6.19.2.new/drivers/mtd/maps/mtx-1_flash.c	2007-07-23 12:21:16.000000000 +0200
+@@ -28,7 +28,7 @@
+ 
+ static struct mtd_partition mtx1_partitions[] = {
+         {
+-                .name = "filesystem",
++                .name = "rootfs",
+                 .size = 0x01C00000,
+                 .offset = 0,
+         },{
diff --git a/target/linux/au1000/patches/014-au1000_eth_ioctl.patch b/target/linux/au1000/patches/014-au1000_eth_ioctl.patch
new file mode 100644
index 0000000000..6187a7d5af
--- /dev/null
+++ b/target/linux/au1000/patches/014-au1000_eth_ioctl.patch
@@ -0,0 +1,15 @@
+--- linux-2.6.22.1.orig/drivers/net/au1000_eth.c	2007-07-24 18:43:25.527583520 +0200
++++ linux-2.6.22.1/drivers/net/au1000_eth.c	2007-07-24 23:07:00.388821102 +0200
+@@ -1320,9 +1320,12 @@
+ 	}
+ }
+ 
++#define AU1000_KNOWN_PHY_IOCTLS 		(SIOCGMIIPHY & 0xfff0)
+ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ 	struct au1000_private *aup = (struct au1000_private *)dev->priv;
++	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
++		return -EINVAL;
+ 
+ 	if (!netif_running(dev)) return -EINVAL;
+ 
diff --git a/target/linux/au1000/patches/015-pci-resource.patch b/target/linux/au1000/patches/015-pci-resource.patch
new file mode 100644
index 0000000000..ddbb7ed8a8
--- /dev/null
+++ b/target/linux/au1000/patches/015-pci-resource.patch
@@ -0,0 +1,14 @@
+--- linux-2.6.22.1.orig/include/asm-mips/mach-au1x00/au1000.h	2007-07-24 18:44:21.598778839 +0200
++++ linux-2.6.22.1/include/asm-mips/mach-au1x00/au1000.h	2007-07-24 22:08:49.761901610 +0200
+@@ -1680,9 +1680,9 @@
+ #define PCI_LAST_DEVFN  (19<<3)
+ 
+ #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+-#define IOPORT_RESOURCE_END   0xffffffff
++#define IOPORT_RESOURCE_END   0xfffffffffULL
+ #define IOMEM_RESOURCE_START  0x10000000
+-#define IOMEM_RESOURCE_END    0xffffffff
++#define IOMEM_RESOURCE_END    0xfffffffffULL
+ 
+   /*
+    * Borrowed from the PPC arch:
diff --git a/target/linux/au1000/patches/016-pci-io_map.patch b/target/linux/au1000/patches/016-pci-io_map.patch
new file mode 100644
index 0000000000..6a80f7cb44
--- /dev/null
+++ b/target/linux/au1000/patches/016-pci-io_map.patch
@@ -0,0 +1,10 @@
+--- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c	2007-07-24 18:42:21.031908123 +0200
++++ linux-2.6.22.1/arch/mips/au1000/common/pci.c	2007-07-24 22:12:07.373162835 +0200
+@@ -74,6 +74,7 @@
+ 		printk(KERN_ERR "Unable to ioremap pci space\n");
+ 		return 1;
+ 	}
++	au1x_controller.io_map_base = virt_io_addr;
+ 
+ #ifdef CONFIG_DMA_NONCOHERENT
+ 	{
diff --git a/target/linux/au1000/patches/017-usb-power.patch b/target/linux/au1000/patches/017-usb-power.patch
new file mode 100644
index 0000000000..7f7fac85bf
--- /dev/null
+++ b/target/linux/au1000/patches/017-usb-power.patch
@@ -0,0 +1,11 @@
+--- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:57:35.000000000 +0200
++++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:59:48.000000000 +0200
+@@ -54,7 +54,7 @@
+ 
+ void __init board_setup(void)
+ {
+-#ifdef CONFIG_USB_OHCI
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) 
+ 	// enable USB power switch
+ 	au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
+ 	au_writel( 0x100000, GPIO2_OUTPUT );