add 2.6.32 support

SVN-Revision: 19492

5 files changed, 80 insertions, 0 deletions

diff --git a/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch
new file mode 100644
index 0000000000..a45832765c
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/alchemy/mtx-1/init.c
++++ b/arch/mips/alchemy/mtx-1/init.c
+@@ -49,7 +49,7 @@ void __init prom_init(void)
+ 	prom_argv = (char **)fw_arg1;
+ 	prom_envp = (char **)fw_arg2;
+ 
+-	prom_init_cmdline();
++	strcpy(arcs_cmdline, CONFIG_CMDLINE);
+ 
+ 	memsize_str = prom_getenv("memsize");
+ 	if (!memsize_str)
diff --git a/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch
new file mode 100644
index 0000000000..e1056e93d9
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/alchemy/mtx-1/platform.c
++++ b/arch/mips/alchemy/mtx-1/platform.c
+@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
+ 
+ static struct mtd_partition mtx1_mtd_partitions[] = {
+ 	{
+-		.name	= "filesystem",
++		.name	= "rootfs",
+ 		.size	= 0x01C00000,
+ 		.offset	= 0,
+ 	},
diff --git a/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch
new file mode 100644
index 0000000000..9bda9a3fe5
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch
@@ -0,0 +1,17 @@
+--- a/drivers/net/au1000_eth.c
++++ b/drivers/net/au1000_eth.c
+@@ -1036,10 +1036,14 @@ static void au1000_multicast_list(struct
+ 	}
+ }
+ 
++#define AU1000_KNOWN_PHY_IOCTLS	(SIOCGMIIPHY & 0xfff0)
+ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ 	struct au1000_private *aup = netdev_priv(dev);
+ 
++	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
++		return -EINVAL;
++
+ 	if (!netif_running(dev)) return -EINVAL;
+ 
+ 	if (!aup->phy_dev) return -EINVAL; // PHY not controllable
diff --git a/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
new file mode 100644
index 0000000000..cfaea00e28
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
@@ -0,0 +1,31 @@
+--- a/drivers/net/au1000_eth.c
++++ b/drivers/net/au1000_eth.c
+@@ -166,6 +166,15 @@ struct au1000_private *au_macs[NUM_ETH_I
+ #  undef AU1XXX_PHY1_IRQ
+ #endif
+ 
++#if defined(CONFIG_MIPS_MTX1)
++/*
++ * 4G MeshCube (MTX-1) board
++ * PHY is at address 31 on MAC0
++ * autodetect fails if not searched for highest address !
++ */
++# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
++#endif
++
+ #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
+ # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
+ #endif
+@@ -483,6 +492,12 @@ static int mii_probe (struct net_device 
+ 	aup->old_duplex = -1;
+ 	aup->phy_dev = phydev;
+ 
++#ifdef CONFIG_MIPS_MTX1
++	/* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
++	printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
++	phy_write(phydev, 0x11, 0xff80);
++#endif
++
+ 	printk(KERN_INFO "%s: attached PHY driver [%s] "
+ 	       "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+ 	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
diff --git a/target/linux/au1000/patches-2.6.32/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.32/006-missing_string_header.patch
new file mode 100644
index 0000000000..8aba202521
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/006-missing_string_header.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/alchemy/mtx-1/init.c
++++ b/arch/mips/alchemy/mtx-1/init.c
+@@ -32,6 +32,7 @@
+ #include <linux/init.h>
+ 
+ #include <asm/bootinfo.h>
++#include <asm/string.h>
+ 
+ #include <prom.h>
+