remove now unsupported kernel versions

SVN-Revision: 25617

5 files changed, 0 insertions, 113 deletions

diff --git a/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch
deleted file mode 100644
index d00cbc73b8..0000000000
--- a/target/linux/au1000/patches-2.6.32/001-mtx1_cmdline.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/init.c
-+++ b/arch/mips/alchemy/mtx-1/init.c
-@@ -32,6 +32,7 @@
- #include <linux/init.h>
- 
- #include <asm/bootinfo.h>
-+#include <asm/string.h>
- 
- #include <prom.h>
- 
-@@ -49,7 +50,7 @@ void __init prom_init(void)
- 	prom_argv = (char **)fw_arg1;
- 	prom_envp = (char **)fw_arg2;
- 
--	prom_init_cmdline();
-+	strcpy(arcs_cmdline, CONFIG_CMDLINE);
- 
- 	memsize_str = prom_getenv("memsize");
- 	if (!memsize_str)
diff --git a/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch
deleted file mode 100644
index e1056e93d9..0000000000
--- a/target/linux/au1000/patches-2.6.32/002-openwrt_rootfs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/platform.c
-+++ b/arch/mips/alchemy/mtx-1/platform.c
-@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
- 
- static struct mtd_partition mtx1_mtd_partitions[] = {
- 	{
--		.name	= "filesystem",
-+		.name	= "rootfs",
- 		.size	= 0x01C00000,
- 		.offset	= 0,
- 	},
diff --git a/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch
deleted file mode 100644
index 2665029764..0000000000
--- a/target/linux/au1000/patches-2.6.32/003-au1000_eth_ioctl.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/drivers/net/au1000_eth.c
-+++ b/drivers/net/au1000_eth.c
-@@ -1035,10 +1035,14 @@ static void au1000_multicast_list(struct
- 	}
- }
- 
-+#define AU1000_KNOWN_PHY_IOCTLS	(SIOCGMIIPHY & 0xfff0)
- static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct au1000_private *aup = netdev_priv(dev);
- 
-+	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
-+		return -EINVAL;
-+
- 	if (!netif_running(dev)) return -EINVAL;
- 
- 	if (!aup->phy_dev) return -EINVAL; // PHY not controllable
diff --git a/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
deleted file mode 100644
index 66b511b400..0000000000
--- a/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/net/au1000_eth.c
-+++ b/drivers/net/au1000_eth.c
-@@ -167,6 +167,15 @@ struct au1000_private *au_macs[NUM_ETH_I
- #  undef AU1XXX_PHY1_IRQ
- #endif
- 
-+#if defined(CONFIG_MIPS_MTX1)
-+/*
-+ * 4G MeshCube (MTX-1) board
-+ * PHY is at address 31 on MAC0
-+ * autodetect fails if not searched for highest address !
-+ */
-+# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-+#endif
-+
- #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
- # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
- #endif
-@@ -484,6 +493,12 @@ static int mii_probe (struct net_device 
- 	aup->old_duplex = -1;
- 	aup->phy_dev = phydev;
- 
-+#ifdef CONFIG_MIPS_MTX1
-+	/* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
-+	printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
-+	phy_write(phydev, 0x11, 0xff80);
-+#endif
-+
- 	printk(KERN_INFO "%s: attached PHY driver [%s] "
- 	       "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
- 	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
diff --git a/target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch b/target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch
deleted file mode 100644
index be37b6e9dd..0000000000
--- a/target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
-index 45b61c9..17140ac 100644
---- a/arch/mips/alchemy/mtx-1/board_setup.c
-+++ b/arch/mips/alchemy/mtx-1/board_setup.c
-@@ -56,8 +56,6 @@ void __init board_setup(void)
- 	}
- #endif
- 
--	alchemy_gpio2_enable();
--
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- 	/* Enable USB power switch */
- 	alchemy_gpio_direction_output(204, 0);
-@@ -92,20 +90,12 @@ void __init board_setup(void)
- int
- mtx1_pci_idsel(unsigned int devsel, int assert)
- {
--#define MTX_IDSEL_ONLY_0_AND_3 0
--#if MTX_IDSEL_ONLY_0_AND_3
--	if (devsel != 0 && devsel != 3) {
--		printk(KERN_ERR "*** not 0 or 3\n");
--		return 0;
--	}
--#endif
--
- 	if (assert && devsel != 0)
- 		/* Suppress signal to Cardbus */
- 		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
- 	else
- 		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
- 
--	au_sync_udelay(1);
-+	udelay(1);
- 	return 1;
- }