atheros: add v3.18 support

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44705

1 files changed, 315 insertions, 0 deletions

diff --git a/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch b/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch
new file mode 100644
index 0000000000..38588ee665
--- /dev/null
+++ b/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch
@@ -0,0 +1,315 @@
+--- a/arch/mips/ar231x/Kconfig
++++ b/arch/mips/ar231x/Kconfig
+@@ -7,4 +7,5 @@ config SOC_AR5312
+ config SOC_AR2315
+ 	bool "Atheros 2315+ support"
+ 	depends on ATHEROS_AR231X
++	select GPIO_AR2315
+ 	default y
+--- a/arch/mips/ar231x/ar2315.c
++++ b/arch/mips/ar231x/ar2315.c
+@@ -212,6 +212,34 @@ static struct platform_device ar2315_wdt
+ 	.num_resources = ARRAY_SIZE(ar2315_wdt_res)
+ };
+ 
++static struct resource ar2315_gpio_res[] = {
++	{
++		.name = "ar2315-gpio",
++		.flags = IORESOURCE_MEM,
++		.start = AR2315_GPIO,
++		.end = AR2315_GPIO + 0x10 - 1,
++	},
++	{
++		.name = "ar2315-gpio",
++		.flags = IORESOURCE_IRQ,
++		.start = AR2315_MISC_IRQ_GPIO,
++		.end = AR2315_MISC_IRQ_GPIO,
++	},
++	{
++		.name = "ar2315-gpio-irq-base",
++		.flags = IORESOURCE_IRQ,
++		.start = AR231X_GPIO_IRQ_BASE,
++		.end = AR231X_GPIO_IRQ_BASE,
++	}
++};
++
++static struct platform_device ar2315_gpio = {
++	.id = -1,
++	.name = "ar2315-gpio",
++	.resource = ar2315_gpio_res,
++	.num_resources = ARRAY_SIZE(ar2315_gpio_res)
++};
++
+ /*
+  * NB: We use mapping size that is larger than the actual flash size,
+  * but this shouldn't be a problem here, because the flash will simply
+@@ -277,6 +305,7 @@ ar2315_init_devices(void)
+ 	ar231x_find_config(ar2315_flash_limit());
+ 	ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
+ 
++	platform_device_register(&ar2315_gpio);
+ 	ar2315_init_gpio_leds();
+ 	platform_device_register(&ar2315_wdt);
+ 	platform_device_register(&ar2315_spiflash);
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -112,6 +112,13 @@ config GPIO_MAX730X
+ 
+ comment "Memory mapped GPIO drivers:"
+ 
++config GPIO_AR2315
++	bool "AR2315 SoC GPIO support"
++	default y if SOC_AR2315
++	depends on SOC_AR2315
++	help
++	  Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
++
+ config GPIO_AR5312
+ 	bool "AR5312 SoC GPIO support"
+ 	default y if SOC_AR5312
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
+ obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
+ obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
+ obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
++obj-$(CONFIG_GPIO_AR2315)	+= gpio-ar2315.o
+ obj-$(CONFIG_GPIO_AR5312)	+= gpio-ar5312.o
+ obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
+ obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ar2315.c
+@@ -0,0 +1,233 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <linux/irq.h>
++
++#define DRIVER_NAME	"ar2315-gpio"
++
++#define AR2315_GPIO_DI			0x0000
++#define AR2315_GPIO_DO			0x0008
++#define AR2315_GPIO_DIR			0x0010
++#define AR2315_GPIO_INT			0x0018
++
++#define AR2315_GPIO_DIR_M(x)		(1 << (x))	/* mask for i/o */
++#define AR2315_GPIO_DIR_O(x)		(1 << (x))	/* output */
++#define AR2315_GPIO_DIR_I(x)		(0)		/* input */
++
++#define AR2315_GPIO_INT_NUM_M		0x3F		/* mask for GPIO num */
++#define AR2315_GPIO_INT_TRIG(x)		((x) << 6)	/* interrupt trigger */
++#define AR2315_GPIO_INT_TRIG_M		(0x3 << 6)	/* mask for int trig */
++
++#define AR2315_GPIO_INT_TRIG_OFF	0	/* Triggerring off */
++#define AR2315_GPIO_INT_TRIG_LOW	1	/* Low Level Triggered */
++#define AR2315_GPIO_INT_TRIG_HIGH	2	/* High Level Triggered */
++#define AR2315_GPIO_INT_TRIG_EDGE	3	/* Edge Triggered */
++
++#define AR2315_GPIO_NUM		22
++
++static u32 ar2315_gpio_intmask;
++static u32 ar2315_gpio_intval;
++static unsigned ar2315_gpio_irq_base;
++static void __iomem *ar2315_mem;
++
++static inline u32 ar2315_gpio_reg_read(unsigned reg)
++{
++	return __raw_readl(ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
++{
++	__raw_writel(val, ar2315_mem + reg);
++}
++
++static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
++{
++	ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
++}
++
++static void ar2315_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
++{
++	u32 pend;
++	int bit = -1;
++
++	/* only do one gpio interrupt at a time */
++	pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++	pend ^= ar2315_gpio_intval;
++	pend &= ar2315_gpio_intmask;
++
++	if (pend) {
++		bit = fls(pend) - 1;
++		pend &= ~(1 << bit);
++		ar2315_gpio_intval ^= (1 << bit);
++	}
++
++	/* Enable interrupt with edge detection */
++	if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
++	    AR2315_GPIO_DIR_I(bit))
++		return;
++
++	if (bit >= 0)
++		generic_handle_irq(ar2315_gpio_irq_base + bit);
++}
++
++static void ar2315_gpio_int_setup(unsigned gpio, int trig)
++{
++	u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
++
++	reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
++	reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
++	ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_irq_unmask(struct irq_data *d)
++{
++	unsigned gpio = d->irq - ar2315_gpio_irq_base;
++	u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
++
++	/* Enable interrupt with edge detection */
++	if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
++		return;
++
++	ar2315_gpio_intmask |= (1 << gpio);
++	ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
++}
++
++static void ar2315_gpio_irq_mask(struct irq_data *d)
++{
++	unsigned gpio = d->irq - ar2315_gpio_irq_base;
++
++	/* Disable interrupt */
++	ar2315_gpio_intmask &= ~(1 << gpio);
++	ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
++}
++
++static struct irq_chip ar2315_gpio_irq_chip = {
++	.name		= DRIVER_NAME,
++	.irq_unmask	= ar2315_gpio_irq_unmask,
++	.irq_mask	= ar2315_gpio_irq_mask,
++};
++
++static void ar2315_gpio_irq_init(unsigned irq)
++{
++	unsigned i;
++
++	ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
++	for (i = 0; i < AR2315_GPIO_NUM; i++) {
++		unsigned _irq = ar2315_gpio_irq_base + i;
++
++		irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
++					 handle_level_irq);
++	}
++	irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
++}
++
++static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
++{
++	return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
++}
++
++static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
++{
++	u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
++
++	reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
++	ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
++}
++
++static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
++{
++	ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
++	return 0;
++}
++
++static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
++{
++	ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
++	ar2315_gpio_set_val(chip, gpio, val);
++	return 0;
++}
++
++static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++	return ar2315_gpio_irq_base + gpio;
++}
++
++static struct gpio_chip ar2315_gpio_chip = {
++	.label			= DRIVER_NAME,
++	.direction_input	= ar2315_gpio_dir_in,
++	.direction_output	= ar2315_gpio_dir_out,
++	.set			= ar2315_gpio_set_val,
++	.get			= ar2315_gpio_get_val,
++	.to_irq			= ar2315_gpio_to_irq,
++	.base			= 0,
++	.ngpio			= AR2315_GPIO_NUM,
++};
++
++static int ar2315_gpio_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct resource *res;
++	unsigned irq;
++	int ret;
++
++	if (ar2315_mem)
++		return -EBUSY;
++
++	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++					   "ar2315-gpio-irq-base");
++	if (!res) {
++		dev_err(dev, "not found GPIO IRQ base\n");
++		return -ENXIO;
++	}
++	ar2315_gpio_irq_base = res->start;
++
++	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
++	if (!res) {
++		dev_err(dev, "not found IRQ number\n");
++		return -ENXIO;
++	}
++	irq = res->start;
++
++	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
++	ar2315_mem = devm_ioremap_resource(dev, res);
++	if (IS_ERR(ar2315_mem))
++		return PTR_ERR(ar2315_mem);
++
++	ar2315_gpio_chip.dev = dev;
++	ret = gpiochip_add(&ar2315_gpio_chip);
++	if (ret) {
++		dev_err(dev, "failed to add gpiochip\n");
++		return ret;
++	}
++
++	ar2315_gpio_irq_init(irq);
++
++	return 0;
++}
++
++static struct platform_driver ar2315_gpio_driver = {
++	.probe = ar2315_gpio_probe,
++	.driver = {
++		.name = DRIVER_NAME,
++		.owner = THIS_MODULE,
++	}
++};
++
++static int __init ar2315_gpio_init(void)
++{
++	return platform_driver_register(&ar2315_gpio_driver);
++}
++subsys_initcall(ar2315_gpio_init);