aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2019-10-25 20:29:36 -0500
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-06 13:37:40 +0100
commitbae0d47f2e36376d2876bc4d5557e3e11f80f2fb (patch)
treee93c9fcf7d01d5a80afde9dcdfd8c94ff5cf9192 /target/linux/ath79
parentd2b9333ea90ed89069879b4a676211c72c859f9b (diff)
downloadupstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.gz
upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.tar.bz2
upstream-bae0d47f2e36376d2876bc4d5557e3e11f80f2fb.zip
ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move &eth0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron <apcameron@softhome.net> [DTS style fixes/improvements, updated commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi130
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts33
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi130
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches1
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk12
7 files changed, 183 insertions, 125 deletions
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
index 5b273d4737..cb329a9a66 100644
--- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
@@ -1,135 +1,15 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca9533_tplink_cpexxx.dtsi"
-#include "qca953x.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- label-mac-device = &eth0;
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- link1 {
- label = "tp-link:green:link1";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- link2 {
- label = "tp-link:green:link2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
-
- link3 {
- label = "tp-link:green:link3";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- led_system: link4 {
- label = "tp-link:green:link4";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset_button {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "partition-table";
- reg = <0x020000 0x10000>;
- read-only;
- };
-
- info: partition@30000 {
- label = "info";
- reg = <0x030000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x040000 0x780000>;
- compatible = "tplink,firmware";
- };
-
- config: partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x30000>;
- read-only;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
+&leds {
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
-&eth0 {
- status = "okay";
- phy-handle = <&swphy4>;
- mtd-mac-address = <&info 0x8>;
-};
-
&eth1 {
compatible = "syscon", "simple-mfd";
};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
-};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
new file mode 100644
index 0000000000..dd90eb1c7d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_cpexxx.dtsi"
+
+/ {
+ compatible = "tplink,cpe220-v3", "qca,qca9533";
+ model = "TP-Link CPE220 v3";
+};
+
+&leds {
+ lan0 {
+ label = "tp-link:green:lan0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
new file mode 100644
index 0000000000..8f0a86334e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_link4;
+ led-failsafe = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ label-mac-device = &wmac;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "tp-link:green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "tp-link:green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "tp-link:green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "tp-link:green:link4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset_button {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+ compatible = "tplink,firmware";
+ };
+
+ config: partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index fbb0d0ea03..de2c8e9197 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -173,6 +173,7 @@ tplink,archer-d50-v1)
;;
tplink,cpe210-v1|\
tplink,cpe220-v2|\
+tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2)
ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 10ca213e70..34f6e31047 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -89,6 +89,7 @@ ath79_setup_interfaces()
comfast,cf-e314n-v2|\
tplink,cpe210-v1|\
tplink,cpe220-v2|\
+ tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
ubnt,nanostation-m|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
index 4d6277c223..04206f4a58 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -44,6 +44,7 @@ tplink,archer-c25-v1)
;;
tplink,cpe210-v1|\
tplink,cpe220-v2|\
+tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 69cb1719e6..a2b112a5ec 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -240,6 +240,18 @@ define Device/tplink_cpe220-v2
endef
TARGET_DEVICES += tplink_cpe220-v2
+define Device/tplink_cpe220-v3
+ $(Device/tplink-safeloader)
+ ATH_SOC := qca9533
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := CPE220
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := CPE220V3
+ LOADER_TYPE := elf
+endef
+TARGET_DEVICES += tplink_cpe220-v3
+
define Device/tplink_cpe510-v1
$(Device/tplink-loader-okli)
ATH_SOC := ar9344