aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorAugust Huber <auh@google.com>2020-01-26 11:55:11 -0500
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-03 16:18:08 +0100
commitae61d21ca30f3af2732f73f82a01bba7e4341459 (patch)
treeaaecd35e672ede2a75d9c3e1be11aabf883d729d /target/linux/ath79
parent3b99d6763996d4cf8d59361f25046cc8086da332 (diff)
downloadupstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.tar.gz
upstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.tar.bz2
upstream-ae61d21ca30f3af2732f73f82a01bba7e4341459.zip
ath79: add support for COMFAST CF-E560AC
This commit adds support for the COMFAST CF-E560AC, an ap143 based in-wall access point. Specifications: - SoC: Qualcomm Atheros QCA9531 - RAM: 128 MB DDR2 (Winbond W971GG6SB-25) - Storage: 16 MB NOR (Winbond 25Q128JVSO) - WAN: 1x 10/100 PoE ethernet (48v) - LAN: 4x 10/100 ethernet - WLAN1: QCA9531 - 802.11b/g/n - 2x SKY85303-21 FEM - WLAN2: QCA9886 - 802.11ac/n/a - 2x SKY85735-11 FEM - USB: one external USB2.0 port - UART: 3.3v, 2.54mm headers already populated on board - LED: 7x external - Button: 1x external - Boot: U-Boot 1.1.4 (pepe2k/u-boot_mod) MAC addressing: - stock LAN *:40 (label) WAN *:41 5G *:42 2.4G *:4a - flash (art partition) 0x0 *:40 (label) 0x6 *:42 0x1002 *:41 0x5006 *:43 This device contains valid MAC addresses in art 0x0, 0x6, 0x1002 and 0x5006, however the vendor firmware only reads from art:0x0 for the LAN interface and then increments in 02_network. They also jump 8 addresses for the second wifi interface (2.4 GHz). This behavior has been duplicated in the DTS and ath10k hotplug to align addresses with the vendor firmware v2.6.0. Recovery instructions: This device contains built-in u-boot tftp recovery. 1. Configure PC with static IP 192.168.1.10/24 and tftp server. 2. Place desired image at /firmware_auto.bin at tftp root. 3. Connect device to PC, and power on. 4. Device will fetch flash from tftp, flash and reboot into new image. Signed-off-by: August Huber <auh@google.com> [move jtag_disable_pins, remove unnecessary statuses in DTS, remove duplicate entry in 11-ath10k-caldata, remove hub_port0 label in DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts174
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds7
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network13
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata7
-rw-r--r--target/linux/ath79/image/generic.mk10
5 files changed, 205 insertions, 6 deletions
diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts
new file mode 100644
index 0000000000..d1c2628d87
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e560ac.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "comfast,cf-e560ac", "qca,qca9531";
+ model = "COMFAST CF-E560AC";
+
+ aliases {
+ serial0 = &uart;
+ label-mac-device = &eth1;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ lan1 {
+ label = "cf-e560ac:blue:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "cf-e560ac:blue:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "cf-e560ac:blue:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "cf-e560ac:blue:lan4";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "cf-e560ac:blue:system";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "cf-e560ac:blue:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "cf-e560ac:blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1200>;
+ always-running;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfc0000>;
+ };
+
+ partition@fe0000 {
+ label = "configs";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <10>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 15a467ccca..55d6772525 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -73,6 +73,13 @@ comfast,cf-e5)
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
;;
+comfast,cf-e560ac)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "$boardname:blue:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2" "LAN2" "$boardname:blue:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "$boardname:blue:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4" "LAN4" "$boardname:blue:lan4" "switch0" "0x10"
+ ;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index f5196be77f..a3fcf35715 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -103,6 +103,13 @@ ath79_setup_interfaces()
ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+ comfast,cf-e560ac|\
+ tplink,archer-c60-v1|\
+ tplink,archer-c60-v2)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+ ;;
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2)
ucidef_add_switch "switch0" \
@@ -228,12 +235,6 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
- tplink,archer-c60-v1|\
- tplink,archer-c60-v2)
- ucidef_set_interface_wan "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
- ;;
tplink,archer-d50-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3be2d337b9..877a1391a9 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -130,6 +130,13 @@ case "$FIRMWARE" in
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
;;
+ comfast,cf-e560ac)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+ ;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index de12d6dac8..3c74b0f7d7 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -300,6 +300,16 @@ define Device/comfast_cf-e5
endef
TARGET_DEVICES += comfast_cf-e5
+define Device/comfast_cf-e560ac
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E560AC
+ DEVICE_PACKAGES := kmod-leds-gpio kmod-usb2 kmod-ath10k-ct \
+ ath10k-firmware-qca9888-ct
+ IMAGE_SIZE := 16128k
+endef
+TARGET_DEVICES += comfast_cf-e560ac
+
define Device/comfast_cf-wr650ac-v1
SOC := qca9558
DEVICE_VENDOR := COMFAST