aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorJohn Marrett <johnf@zioncluster.ca>2021-06-08 12:57:28 -0400
committerDavid Bauer <mail@david-bauer.net>2021-08-05 01:48:17 +0200
commit252466a0ced3ec9f58b213ffd34a900fe3834cab (patch)
tree05ef28e494dd1f7653b2018c93e9f3b3f29be592 /target/linux/ath79
parent13d6d27422da7efa2f6c731cf742ffd1bdbb2561 (diff)
downloadupstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.tar.gz
upstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.tar.bz2
upstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.zip
ath79: add support for GL.iNet GL-X300B
The GL-X300B is a industrial 4G LTE router based on the Qualcomm QCA9531 SoC. Specifications: - Qualcomm QCA9531 @ 650 MHz - 128 MB of RAM - 16 MB of SPI NOR FLASH - 2x 10/100 Mbps Ethernet - 2.4GHz 802.11b/g/n - 1x USB 2.0 (vbus driven by GPIO) - 4x LED, driven by GPIO - 1x button (reset) - 1x mini pci-e slot (vcc driven by GPIO) - RS-485 Serial Port (untested) Flash instructions: This firmware can be flashed using either sysupgrade from the GL.iNet firmware or the recovery console as follows: - Press and hold the reset button - Connect power to the router, wait five seconds - Manually configure 192.168.1.2/24 on your computer, connect to 192.168.1.1 - Upload the firmware image using the web interface RS-485 serial port is untested and may depend on the following commit in the GL.iNet repo: https://github.com/gl-inet/openwrt/commit/202e83a32ae308fbb70502b6dbe3bb0bf8b1fba9 MAC addresses as verified by OEM firmware: vendor OpenWrt address WAN eth0 label LAN eth1 label + 1 2g phy0 label + 2 The label MAC address was found in the art partition at 0x0 Based on vendor commit: https://github.com/gl-inet/openwrt/commit/16c5708b207eb76ff19a040dc973e560d3d8074b Signed-off-by: John Marrett <johnf@zioncluster.ca>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/qca9531_glinet_gl-x300b.dts139
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds1
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/image/generic.mk9
4 files changed, 154 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-x300b.dts b/target/linux/ath79/dts/qca9531_glinet_gl-x300b.dts
new file mode 100644
index 0000000000..5e722bbc26
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-x300b.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-x300b", "qca,qca9531";
+ model = "GL.iNet GL-X300B";
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "green:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lte {
+ label = "green:lte";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ minipcie {
+ gpio-export,name = "minipcie";
+ gpio-export,output = <0>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ rs485tx_en {
+ gpio-export,name = "rs485tx_en";
+ gpio-export,output = <0>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ ble_rst {
+ gpio-export,name = "ble_rst";
+ gpio-export,output = <0>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog {
+ compatible = "hw_wdt";
+ dog_en_gpio = <12>;
+ feed_dog_gpio = <2>;
+ feed_dog_interval = <100000000>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ nor_partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&swphy4>;
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 8fa8b48562..7a07b0ce6d 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -219,6 +219,7 @@ qxwlan,e750a-v4-16m)
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
;;
+glinet,gl-x300b|\
glinet,gl-x750)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index af8619845b..4fe7fbc027 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -272,6 +272,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan"
;;
+ glinet,gl-x300b)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "4:lan"
+ ;;
iodata,etg3-r|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index b33a578f19..2abe1b7307 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1243,6 +1243,15 @@ define Device/glinet_gl-usb150
endef
TARGET_DEVICES += glinet_gl-usb150
+define Device/glinet_gl-x300b
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-X300B
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += glinet_gl-x300b
+
define Device/glinet_gl-x750
SOC := qca9531
DEVICE_VENDOR := GL.iNet