diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2022-02-09 01:32:47 +0900 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2022-02-20 13:45:06 +0900 |
| commit | 3e3e78de1103cb0c5af4cc229152236758c37901 (patch) | |
| tree | 5323b71c84e13cdeb203f06f731c41c04baecff2 /target/linux/ath79 | |
| parent | b0d5939b80008aca8090832eb9918b998f08e8f3 (diff) | |
| download | upstream-3e3e78de1103cb0c5af4cc229152236758c37901.tar.gz upstream-3e3e78de1103cb0c5af4cc229152236758c37901.tar.bz2 upstream-3e3e78de1103cb0c5af4cc229152236758c37901.zip | |
ath79: utilize nvmem on Netgear EX7300 v2
mtd-mac-address should no longer be used after commit 5ae2e786395c
("kernel: drop support for mtd-mac-address"). Convert it to nvmem-cells.
While at it, also convert OpenWrt's custom mtd-cal-data property and
userspace pre-calibration data extraction to the nvmem implementation.
Note: nvmem-cells in QCN5502 wmac has not been tested.
Fixes: c32008a37b81 ("ath79: add partial support for Netgear EX7300v2")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ath79')
| -rw-r--r-- | target/linux/ath79/dts/qcn5502_netgear_ex7300-v2.dts | 56 | ||||
| -rw-r--r-- | target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 4 |
2 files changed, 46 insertions, 14 deletions
diff --git a/target/linux/ath79/dts/qcn5502_netgear_ex7300-v2.dts b/target/linux/ath79/dts/qcn5502_netgear_ex7300-v2.dts index ba8dae0b36..e5d897029d 100644 --- a/target/linux/ath79/dts/qcn5502_netgear_ex7300-v2.dts +++ b/target/linux/ath79/dts/qcn5502_netgear_ex7300-v2.dts @@ -114,6 +114,14 @@ &pcie { status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + nvmem-cells = <&macaddr_artmtd_c>, <&precal_art_5000>; + nvmem-cell-names = "mac-address", "pre-calibration"; + }; }; &pll { @@ -133,7 +141,7 @@ #address-cells = <1>; #size-cells = <1>; - uboot: partition@0 { + partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; @@ -174,29 +182,56 @@ read-only; }; - artmtd: partition@fe0000 { + partition@fe0000 { label = "artmtd"; reg = <0xfe0000 0x10000>; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_artmtd_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_artmtd_6: macaddr@6 { + reg = <0x6 0x6>; + }; + + macaddr_artmtd_c: macaddr@c { + reg = <0xc 0x6>; + }; }; - art: partition@ff0000 { + partition@ff0000 { label = "art"; reg = <0xff0000 0x10000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; }; }; }; -/* -Does not work due to lack of QCN5502 support in ath9k. + &wmac { - status = "okay"; + /* Does not work due to lack of QCN5502 support in ath9k. */ + status = "disabled"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&artmtd 0x6>; + nvmem-cells = <&macaddr_artmtd_6>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; }; -*/ &mdio0 { status = "okay"; @@ -210,7 +245,8 @@ Does not work due to lack of QCN5502 support in ath9k. ð0 { status = "okay"; - mtd-mac-address = <&artmtd 0x0>; + nvmem-cells = <&macaddr_artmtd_0>; + nvmem-cell-names = "mac-address"; phy-handle = <&phy5>; phy-mode = "sgmii"; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index cf16fa2318..a7ea58b507 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -219,10 +219,6 @@ case "$FIRMWARE" in caldata_extract "caldata" 0x5000 0x2f20 ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; - netgear,ex7300-v2) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_binary artmtd 0xc) - ;; phicomm,k2t) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(k2t_get_mac "5g_mac") |