diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 12:46:26 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 15:44:05 +0200 |
| commit | 705fe43522c756962589b360141d4c398363ce1c (patch) | |
| tree | 41abaa8948ae18fe27f45d07bf0ecfa18ed0e8ce /target/linux/ath79 | |
| parent | 479f1f2c92f6b7e75f945cfdb2214b609a92b692 (diff) | |
| download | upstream-705fe43522c756962589b360141d4c398363ce1c.tar.gz upstream-705fe43522c756962589b360141d4c398363ce1c.tar.bz2 upstream-705fe43522c756962589b360141d4c398363ce1c.zip | |
ath79: fix LEDs for GL.inet GL-AR150
Since the wireless LED was used for boot and set up with a DT
trigger, the WiFi indication hasn't worked on ath79 at all.
In addition, a look into the manual revealed that the OEM
configuration is as follows:
LED 1 (green): power
LED 2 (green): configurable
LED 3 (red): wireless
So, let's just keep the WiFi trigger and convert the rest to its
"intended" use.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79')
| -rw-r--r-- | target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts | 18 | ||||
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 4 |
2 files changed, 10 insertions, 12 deletions
diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts index 68e1995c76..d81d477227 100644 --- a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts +++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts @@ -12,29 +12,31 @@ aliases { serial0 = &uart; - led-boot = &led_wlan; - led-failsafe = &led_wlan; - led-upgrade = &led_wlan; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; label-mac-device = ð0; }; leds { compatible = "gpio-leds"; - led_wlan: wlan { + wlan { label = "gl-ar150:orange:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; - lan { - label = "gl-ar150:green:lan"; + configurable { + label = "gl-ar150:green:configurable"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; - wan { - label = "gl-ar150:green:wan"; + led_power: power { + label = "gl-ar150:green:power"; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8e3b5e17af..d4fdb423ab 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -125,10 +125,6 @@ glinet,6408|\ glinet,6416) ucidef_set_led_netdev "lan" "LAN" "gl-inet:green:lan" "eth0" ;; -glinet,gl-ar150) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" - ;; glinet,gl-ar300m-lite) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0" ;; |