aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2019-01-14 20:14:54 -0600
committerChristian Lamparter <chunkeey@gmail.com>2019-06-24 20:22:24 +0200
commite15049c88b917d1f9f75ed095f59f1dc6d69501c (patch)
tree180de81bc9ad2ebe99b56bbfdbaad5f5db6cb751 /target/linux/ath79
parent8a5a01a67769f3822e365342d706b3cb57ef97f3 (diff)
downloadupstream-e15049c88b917d1f9f75ed095f59f1dc6d69501c.tar.gz
upstream-e15049c88b917d1f9f75ed095f59f1dc6d69501c.tar.bz2
upstream-e15049c88b917d1f9f75ed095f59f1dc6d69501c.zip
ath79: add support for TP-Link CPE610-v1
TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, WLAN5G green LEDs - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts140
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk11
4 files changed, 155 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 41a4abae18..46b3e51193 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -155,6 +155,9 @@ tplink,cpe210-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
;;
+tplink,cpe610-v1)
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+ ;;
tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 84c83ff01e..fffb00eca0 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -25,6 +25,7 @@ ath79_setup_interfaces()
pqi,air-pen|\
tplink,cpe210-v2|\
tplink,cpe210-v3|\
+ tplink,cpe610-v1|\
tplink,re350k-v1|\
tplink,re450-v2|\
tplink,tl-mr10u|\
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
new file mode 100644
index 0000000000..5b7c32c6b7
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "TP-Link CPE610 v1";
+ compatible = "tplink,cpe610-v1", "qca,ar9344";
+
+ aliases {
+ led-boot = &system;
+ led-failsafe = &system;
+ led-upgrade = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system: lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x000000 0x1c0000>;
+ };
+
+ partition@1c0000 {
+ label = "rootfs";
+ reg = <0x1c0000 0x5c0000>;
+ };
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x08>;
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x08>;
+
+ phy-mode = "mii";
+ phy-handle = <&swphy4>;
+};
+
+&eth1 {
+ status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 4757df49c6..73275ccf35 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -146,6 +146,17 @@ define Device/tplink_cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
+define Device/tplink_cpe610-v1
+ $(Device/tplink-safeloader)
+ ATH_SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_TITLE := TP-Link CPE610 v1
+ TPLINK_BOARD_ID := CPE610V1
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel
+endef
+TARGET_DEVICES += tplink_cpe610-v1
+
define Device/tplink_archer-d50-v1
ATH_SOC := qca9531
DEVICE_TITLE := TP-Link Archer D50 v1