diff options
| author | Matt Merhar <mattmerhar@protonmail.com> | 2018-07-30 14:11:09 -0400 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 20:22:44 +0200 |
| commit | af3b1756f00bfd1e6726d85ce23336112201afce (patch) | |
| tree | 067b4ce9cb97b2e4768388ca8ac5a670e7c58782 /target/linux/ath79 | |
| parent | af9a96d23eda3c9989e8b80c9ad2a9c41334aefd (diff) | |
| download | upstream-af3b1756f00bfd1e6726d85ce23336112201afce.tar.gz upstream-af3b1756f00bfd1e6726d85ce23336112201afce.tar.bz2 upstream-af3b1756f00bfd1e6726d85ce23336112201afce.zip | |
ath79: fix irq assignment for pci-ar71xx driver
In the new DT-based pci-ar71xx driver, ar71xx_pci_irq_init() was being
called before populating the PCI controller's device_node struct member.
This led to no IRQ being assigned to connected PCI devices (e.g. ath9k
cards) and caused them to be non-functional aside from simply being
detected.
The previous errors encountered in dmesg were: "irq: no irq domain found
for /ahb/apb/pcie-controller@180c0000 !". /proc/interrupts listed an IRQ
of 0 for the cards.
While this has been only been tested on a yet-to-be-merged RouterStation
Pro target, it should also fix the broken wifi people have reported for
the ath79 WNDR3800 target.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Diffstat (limited to 'target/linux/ath79')
| -rw-r--r-- | target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch b/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch index 2d9ddf4a2c..ea3514a528 100644 --- a/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch +++ b/target/linux/ath79/patches-4.14/0020-MIPS-ath79-turn-pci-ar71xx-driver-into-a-pure-OF-dri.patch @@ -175,15 +175,19 @@ Signed-off-by: John Crispin <john@phrozen.org> ar71xx_pci_reset(); /* setup COMMAND register */ -@@ -380,9 +376,11 @@ static int ar71xx_pci_probe(struct platf - - ar71xx_pci_irq_init(apc); +@@ -378,11 +374,13 @@ static int ar71xx_pci_probe(struct platf + /* clear bus errors */ + ar71xx_pci_check_error(apc, 1); +- ar71xx_pci_irq_init(apc); +- + apc->np = pdev->dev.of_node; apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; apc->pci_ctrl.mem_resource = &apc->mem_res; apc->pci_ctrl.io_resource = &apc->io_res; + pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node); ++ ++ ar71xx_pci_irq_init(apc); register_pci_controller(&apc->pci_ctrl); |