aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorSven Eckelmann <sven@narfation.org>2020-11-23 13:41:34 +0100
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commit5fc28ef47959c1256f2553d507224bb481b08494 (patch)
tree2b84e59d7b658d37c2f648590013638e51ddfb2d /target/linux/ath79
parent727eebbad1b9dea91174ea675cb64ea13484f790 (diff)
downloadupstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.gz
upstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.bz2
upstream-5fc28ef47959c1256f2553d507224bb481b08494.zip
ath79: Add support for Plasma Cloud PA300
Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts8
-rw-r--r--target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi140
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh104
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/platform.sh7
-rw-r--r--target/linux/ath79/image/generic.mk18
6 files changed, 278 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
new file mode 100644
index 0000000000..8de89292ea
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_plasmacloud_pa300.dtsi"
+
+/ {
+ compatible = "plasmacloud,pa300", "qca,qca9533";
+ model = "Plasma Cloud PA300";
+};
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
new file mode 100644
index 0000000000..0bc6d4fa28
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ /delete-property/ bootargs;
+ };
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ label-mac-device = &eth0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_red {
+ label = "red:status";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ status_blue {
+ label = "blue:status";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ /* partitions are passed via bootloader */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ partition@80000 {
+ label = "custom";
+ reg = <0x080000 0x140000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "inactive";
+ reg = <0x1c0000 0x700000>;
+ };
+
+ partition@8c0000 {
+ label = "inactive2";
+ reg = <0x8c0000 0x700000>;
+ };
+
+ art: partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
+ */
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x0>;
+ mtd-mac-address-increment = <2>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 766c0d0712..f868d8dc94 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -149,6 +149,7 @@ ath79_setup_interfaces()
comfast,cf-e120a-v3|\
comfast,cf-e314n-v2|\
compex,wpj531-16m|\
+ plasmacloud,pa300|\
tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh
new file mode 100644
index 0000000000..68733ccf15
--- /dev/null
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh
@@ -0,0 +1,104 @@
+# The U-Boot loader with the datachk patchset for dualbooting requires image
+# sizes and checksums to be provided in the U-Boot environment.
+# The devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_do_upgrade_dualboot_datachk() {
+ local tar_file="$1"
+ local restore_backup
+ local primary_kernel_mtd
+
+ local setenv_script="/tmp/fw_env_upgrade"
+
+ local inactive_mtd="$(find_mtd_index $PART_NAME)"
+ local inactive_offset="$(cat /sys/class/mtd/mtd${inactive_mtd}/offset)"
+ local total_size="$(cat /sys/class/mtd/mtd${inactive_mtd}/size)"
+ local flash_start_mem=0x9f000000
+
+ # detect to which flash region the new image is written to.
+ #
+ # 1. check what is the mtd index for the first flash region on this
+ # device
+ # 2. check if the target partition ("inactive") has the mtd index of
+ # the first flash region
+ #
+ # - when it is: the new bootseq will be 1,2 and the first region is
+ # modified
+ # - when it isnt: bootseq will be 2,1 and the second region is
+ # modified
+ #
+ # The detection has to be done via the hardcoded mtd partition because
+ # the current boot might be done with the fallback region. Let us
+ # assume that the current bootseq is 1,2. The bootloader detected that
+ # the image in flash region 1 is corrupt and thus switches to flash
+ # region 2. The bootseq in the u-boot-env is now still the same and
+ # the sysupgrade code can now only rely on the actual mtd indexes and
+ # not the bootseq variable to detect the currently booted flash
+ # region/image.
+ #
+ # In the above example, an implementation which uses bootseq ("1,2") to
+ # detect the currently booted image would assume that region 1 is booted
+ # and then overwrite the variables for the wrong flash region (aka the
+ # one which isn't modified). This could result in a device which doesn't
+ # boot anymore to Linux until it was reflashed with ap51-flash.
+ local next_boot_part="1"
+ case "$(board_name)" in
+ plasmacloud,pa300)
+ primary_kernel_mtd=3
+ ;;
+ *)
+ echo "failed to detect primary kernel mtd partition for board"
+ return 1
+ ;;
+ esac
+ [ "$inactive_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
+ local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+ # rootfs without EOF marker
+ rootfs_length=$((rootfs_length-4))
+
+ local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
+ # md5 checksum of rootfs with EOF marker
+ local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
+
+ #
+ # add tar support to get_image() to use default_do_upgrade() instead?
+ #
+
+ # take care of restoring a saved config
+ [ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+ mtd -q erase inactive
+ tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+ tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
+
+ # prepare new u-boot env
+ if [ "$next_boot_part" = "1" ]; then
+ echo "bootseq 1,2" > $setenv_script
+ else
+ echo "bootseq 2,1" > $setenv_script
+ fi
+
+ printf "kernel_size_%i %i\n" $next_boot_part $((kernel_length / 1024)) >> $setenv_script
+ printf "vmlinux_start_addr 0x%08x\n" $((flash_start_mem + inactive_offset)) >> $setenv_script
+ printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+ printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+ printf "rootfs_size_%i %i\n" $next_boot_part $(((total_size-kernel_length) / 1024)) >> $setenv_script
+ printf "rootfs_start_addr 0x%08x\n" $((flash_start_mem+inactive_offset+kernel_length)) >> $setenv_script
+ printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
+ printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+ # store u-boot env changes
+ mkdir -p /var/lock
+ fw_setenv -s $setenv_script || {
+ echo "failed to update U-Boot environment"
+ return 1
+ }
+}
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index f4fca06384..3ce273990f 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -5,6 +5,9 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
redboot_fis_do_upgrade() {
local append
local sysup_file="$1"
@@ -47,6 +50,10 @@ platform_do_upgrade() {
jjplus,ja76pf2)
redboot_fis_do_upgrade "$1" linux
;;
+ plasmacloud,pa300)
+ PART_NAME="inactive"
+ platform_do_upgrade_dualboot_datachk "$1"
+ ;;
ubnt,routerstation|\
ubnt,routerstation-pro)
redboot_fis_do_upgrade "$1" kernel
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 333420c827..935dee75d7 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1579,6 +1579,24 @@ define Device/pisen_wmm003n
endef
TARGET_DEVICES += pisen_wmm003n
+define Device/plasmacloud_pa300-common
+ SOC := qca9533
+ DEVICE_VENDOR := Plasma Cloud
+ DEVICE_PACKAGES := uboot-envtools
+ IMAGE_SIZE := 7168k
+ BLOCKSIZE := 64k
+ IMAGES += factory.bin
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+
+define Device/plasmacloud_pa300
+ $(Device/plasmacloud_pa300-common)
+ DEVICE_MODEL := PA300
+endef
+TARGET_DEVICES += plasmacloud_pa300
+
define Device/qihoo_c301
$(Device/seama)
SOC := ar9344