aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorWeijie Gao <hackpascal@gmail.com>2018-12-29 17:22:32 +0800
committerMathias Kresin <dev@kresin.me>2018-12-30 20:08:13 +0100
commitabc7ed2c58860fc1363129efbe9e8c60f81a802c (patch)
tree972d250921df3ca509c8a98aa514a0e774c1e5b6 /target/linux/ath79
parentfd35c5b205e7583628472b607ee4eb41c6d1b6d5 (diff)
downloadupstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.gz
upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.bz2
upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.zip
ath79: add support for D-Link DIR-859 A1
Hardware spec of DIR-859 A1: SoC: QCA9563 DRAM: 64MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9880 USB is supported on the PCB but not connected. Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Weijie Gao <hackpascal@gmail.com> [squash commits, use common seama recipes, sync factory image recipe with ramips version] Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom4
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rw-r--r--target/linux/ath79/config-4.141
-rw-r--r--target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts177
-rw-r--r--target/linux/ath79/image/generic.mk29
7 files changed, 223 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 04c8964c9e..cc718b4d96 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -28,6 +28,9 @@ buffalo,whr-g301n)
ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
;;
+dlink,dir-859-a1)
+ ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
+ ;;
etactica,eg200)
ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 004ab59573..1251048e08 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -158,6 +158,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
+ dlink,dir-859-a1|\
tplink,tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
@@ -234,6 +235,10 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "mac" 4)
wan_mac=$(mtd_get_mac_text "mac" 24)
;;
+ dlink,dir-859-a1)
+ lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+ wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+ ;;
elecom,wrc-300ghbk2-i)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index f6ff582150..2da9250ddf 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -105,6 +105,10 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 4) 2
;;
+ dlink,dir-859-a1)
+ ath9k_eeprom_extract "art" 4096 1088
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
+ ;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2|\
iodata,wn-ag300dgr)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 53f57be824..b9a987d418 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -92,6 +92,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
;;
+ dlink,dir-859-a1)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+ ;;
glinet,gl-x750)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
diff --git a/target/linux/ath79/config-4.14 b/target/linux/ath79/config-4.14
index 969136ddde..5a2c685d40 100644
--- a/target/linux/ath79/config-4.14
+++ b/target/linux/ath79/config-4.14
@@ -168,6 +168,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_TPLINK_PARTS=y
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
new file mode 100644
index 0000000000..23b4cc5126
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ model = "D-Link DIR-859 A1";
+ compatible = "dlink,dir-859-a1", "qca,qca9563";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "dir-859-a1:green:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "dir-859-a1:green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "dir-859-a1:green:internet";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "dir-859-a1:green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio_switch_reset {
+ gpio-export,name = "dir-859-a1:reset:switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "bdcfg";
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRIP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xcb37cb37 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x00f3cf00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index b2f83ba58c..8dd5dab7ca 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -2,6 +2,7 @@ include ./common-buffalo.mk
include ./common-netgear.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
+DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
define Build/cybertan-trx
@echo -n '' > $@-empty.bin
@@ -53,6 +54,23 @@ define Build/nec-fw
mv $@.new $@
endef
+define Device/seama
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | seama
+ IMAGES += factory.bin
+ SEAMA_MTDBLOCK := 1
+
+ # 64 bytes offset:
+ # - 28 bytes seama_header
+ # - 36 bytes of META data (4-bytes aligned)
+ IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
+ IMAGE/sysupgrade.bin := \
+ $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := \
+ $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
+ SEAMA_SIGNATURE :=
+endef
+
define Device/avm_fritz300e
ATH_SOC := ar7242
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
@@ -192,6 +210,17 @@ define Device/dlink_dir-835-a1
endef
TARGET_DEVICES += dlink_dir-835-a1
+define Device/dlink_dir-859-a1
+ $(Device/seama)
+ ATH_SOC := qca9563
+ DEVICE_TITLE := D-LINK DIR-859 A1
+ IMAGE_SIZE := 15872k
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
+ SUPPORTED_DEVICES += dir-859-a1
+endef
+TARGET_DEVICES += dlink_dir-859-a1
+
define Device/elecom_wrc-300ghbk2-i
ATH_SOC := qca9563
DEVICE_TITLE := ELECOM WRC-300GHBK2-I