aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-05-09 14:55:16 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-06-10 11:25:47 +0200
commitfde0abf267033bfaaf08dc2f5cbba2bf2a3ff897 (patch)
tree956ec52bbdec2b5e4aa1418f859dad31817a5b1c /target/linux/ath79
parent409940cef46e1c6ffd2e448f21abda8967e6ed5d (diff)
downloadupstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.tar.gz
upstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.tar.bz2
upstream-fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897.zip
ath79: Add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router. Specification: - CPU: Atheros QCA9561 775 MHz - RAM: 64 MB - Flash: 8 MB - Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 - NET: 5x 10/100 Mbps Ethernet Some LEDs are controlled by an additional 74HC595 chip, but not all of them as e.g. for the C59. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds19
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches4
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rw-r--r--target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts201
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk11
6 files changed, 231 insertions, 9 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 38927be33b..41a4abae18 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -126,6 +126,16 @@ tplink,archer-c6-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
;;
+tplink,archer-c25-v1|\
+tplink,tl-wr841-v9|\
+tplink,tl-wr841-v11|\
+tplink,tl-wr842n-v3)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+ ;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
@@ -175,15 +185,6 @@ tplink,tl-wr842n-v2)
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
-tplink,tl-wr841-v9|\
-tplink,tl-wr841-v11|\
-tplink,tl-wr842n-v3)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ;;
ubnt,bullet-m|\
ubnt,bullet-m-xw|\
ubnt,nanostation-m|\
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 99e7825c67..84c83ff01e 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -68,6 +68,7 @@ ath79_setup_interfaces()
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
buffalo,wzr-hp-ag300h|\
+ tplink,archer-c25-v1|\
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-wr841-v7|\
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index 1c8a46df19..7f40285daf 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -23,6 +23,10 @@ dlink,dir-835-a1)
librerouter,librerouter-v1)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
;;
+tplink,archer-c25-v1)
+ ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
+ ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c3bdc94866..b96c9a00b5 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -137,6 +137,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ tplink,archer-c25-v1)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) -1)
+ ;;
tplink,archer-a7-v5|\
tplink,archer-c2-v3|\
tplink,archer-c7-v4|\
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
new file mode 100644
index 0000000000..3c971b5464
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c25-v1", "qca,qca9561";
+ model = "TP-Link Archer C25 v1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ /* can be removed on 4.19 */
+ gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wifi_button {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ reset_button {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "tp-link:green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "tp-link:green:wlan2g";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan_green {
+ label = "tp-link:green:wan";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "tp-link:amber:wan";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "tp-link:green:lan2";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "tp-link:green:lan3";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "tp-link:green:lan4";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ config: partition@7d0000 {
+ label = "config";
+ reg = <0x7d0000 0x010000>;
+ read-only;
+ };
+
+ info: partition@7e0000 {
+ label = "info";
+ reg = <0x7e0000 0x010000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&eth0 {
+ phy-mode = "mii";
+ phy-handle = <&swphy4>;
+
+ status = "okay";
+ mtd-mac-address = <&info 0x8>;
+};
+
+&eth1 {
+ status = "okay";
+ mtd-mac-address = <&info 0x8>;
+ mtd-mac-address-increment = <1>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 4a5bb93864..8431e3a347 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -22,6 +22,17 @@ define Device/tplink_archer-c2-v3
endef
TARGET_DEVICES += tplink_archer-c2-v3
+define Device/tplink_archer-c25-v1
+ $(Device/tplink-safeloader-uimage)
+ ATH_SOC := qca9561
+ IMAGE_SIZE := 7808k
+ DEVICE_TITLE := TP-Link Archer C25 v1
+ TPLINK_BOARD_ID := ARCHER-C25-V1
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ SUPPORTED_DEVICES += archer-c25-v1
+endef
+TARGET_DEVICES += tplink_archer-c25-v1
+
define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561