aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-05-06 15:29:16 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 16:38:18 +0200
commitd4b89b7170ab82530cfaf21e5f00bee7088432e2 (patch)
treed03aab5ed32694c3230857e30c6d0ebe1b84c9a2 /target/linux/ath79
parent78ea648a3a4efef6b953b6c5958dc569e59d94df (diff)
downloadupstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.gz
upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.bz2
upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.zip
ath79: Add support for TP-Link TL-WR1043N v5
Specifications: - QCA9563 at 775 MHz - 64 MB RAM Zentel A3R12E40CBF-8E - 16 MB flash Winbond W25Q128FVSG - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. It also has different partitioning scheme. The software is more in line with the Archer series in that it uses a nested bootloader scheme. (This has been adapted from the OpenWrt Wiki page) <https://openwrt.org/toh/tp-link/tl-wr1043nd> Installation on HW rev.5: Factory firmware can be installed via the WEB interface. Alternatively, it is also possible to use a TFTP server for recovery purposes: - Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin - Set static IP of your PC to *192.168.0.66* - Router will obtain IP 192.168.0.86 for a few seconds while loading, when reset button pressed at power On. And finally, there's always u-boot access through the UART. For information visit the wiki. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworked commit message]
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts74
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk10
4 files changed, 90 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 40aacab331..9bcfbb2b0a 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -110,7 +110,8 @@ tplink,archer-c7-v5)
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
tplink,archer-c2-v3|\
-tplink,tl-wr1043nd-v4)
+tplink,tl-wr1043nd-v4|\
+tplink,tl-wr1043n-v5)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 25f6f5bead..5892baca80 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -96,7 +96,8 @@ ath79_setup_interfaces()
dlink,dir-859-a1|\
engenius,epg5000|\
tplink,archer-c2-v3|\
- tplink,tl-wr1043nd-v4)
+ tplink,tl-wr1043nd-v4|\
+ tplink,tl-wr1043n-v5)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@@ -343,7 +344,8 @@ ath79_setup_macs()
base_mac=$(mtd_get_mac_binary config 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
- tplink,tl-wr1043nd-v4)
+ tplink,tl-wr1043nd-v4|\
+ tplink,tl-wr1043n-v5)
base_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
new file mode 100644
index 0000000000..d983498b6a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n-v5.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_tplink_tl-wr1043n.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043n-v5", "qca,qca9563";
+ model = "TP-Link TL-WR1043N v5";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x040000 0xec0000>;
+ };
+
+ info: partition@f00000 {
+ label = "product-info";
+ reg = <0xf00000 0x020000>;
+ read-only;
+ };
+
+ partition@f20000 {
+ label = "config";
+ reg = <0xf20000 0x0a0000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "partition-table";
+ reg = <0xfc0000 0x010000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "logs";
+ reg = <0xfd0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index b7b5d3e3cb..a3e1708fe1 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -285,6 +285,16 @@ define Device/tplink_tl-wr1043nd-v4
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v4
+define Device/tplink_tl-wr1043n-v5
+ $(Device/tplink-safeloader-uimage)
+ ATH_SOC := qca9563
+ IMAGE_SIZE := 15104k
+ DEVICE_TITLE := TP-Link TL-WR1043N v5
+ TPLINK_BOARD_ID := TLWR1043NV5
+ SUPPORTED_DEVICES += tl-wr1043n-v5
+endef
+TARGET_DEVICES += tplink_tl-wr1043n-v5
+
define Device/tplink_tl-wr2543-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar7242