aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorChuanhong Guo <gch981213@gmail.com>2019-05-16 12:50:10 +0800
committerPetr Štetiar <ynezz@true.cz>2019-06-05 10:12:31 +0200
commitc3a85189181827c8d5c2ab736428be30e4c13128 (patch)
tree69026780b73cfda3f55af4109ca1e6888c593386 /target/linux/ath79
parent8dde11d521d0b02dd417877f5d9aefe7a35afa0e (diff)
downloadupstream-c3a85189181827c8d5c2ab736428be30e4c13128.tar.gz
upstream-c3a85189181827c8d5c2ab736428be30e4c13128.tar.bz2
upstream-c3a85189181827c8d5c2ab736428be30e4c13128.zip
ath79: fix default config for devices with eth0/eth1 swapped
also fix the following problems in this commit: glinet,gl-ar150: This router uses an uncommon order of setting up gmacs in ar71xx. gmac0 is preferred to be wan port because of the additional link status info available. So this router will have eth0/eth1 swapped comparing to ar71xx. tplink,tl-wr710n-v1: same as gl-ar150 embeddedwireless,dorin: eth0 is used as switch port, which was incorrect. It's correct now, so keep this one untouched. tplink,tl-wr842n-v1: we don't swap PHYs on ar7241 so the original port order is incorrect. reorder archer-a7-v5 entry. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds26
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network100
2 files changed, 56 insertions, 70 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 2250c83b4d..22a395c59f 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -18,7 +18,7 @@ avm,fritz300e)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
;;
avm,fritz4020)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
;;
buffalo,whr-g301n)
@@ -29,7 +29,7 @@ buffalo,whr-g301n)
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
;;
comfast,cf-e110n-v2)
- ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
@@ -39,7 +39,7 @@ comfast,cf-e110n-v2)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
;;
comfast,cf-e120a-v3)
- ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x04"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
@@ -49,7 +49,7 @@ comfast,cf-e120a-v3)
;;
comfast,cf-e5)
ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
- ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
@@ -62,8 +62,8 @@ engenius,ecb1750)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
engenius,ews511ap)
- ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth0"
- ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth1"
+ ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
+ ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
;;
etactica,eg200)
ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
@@ -71,18 +71,18 @@ etactica,eg200)
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
glinet,gl-ar150)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
;;
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor)
- ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth1"
+ ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
;;
glinet,gl-ar300m-lite)
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
;;
glinet,gl-x750)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
;;
netgear,wnr612-v2|\
on,n150r)
@@ -121,7 +121,7 @@ tplink,tl-wr1043n-v5)
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
;;
tplink,archer-c6-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
@@ -165,7 +165,7 @@ tplink,tl-wr740n-v4|\
tplink,tl-wr741nd-v4|\
tplink,tl-wr841-v8|\
tplink,tl-wr842n-v2)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
@@ -174,7 +174,7 @@ tplink,tl-wr842n-v2)
tplink,tl-wr841-v9|\
tplink,tl-wr841-v11|\
tplink,tl-wr842n-v3)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
@@ -207,7 +207,7 @@ wd,mynet-wifi-rangeextender)
ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
;;
yuncore,a770)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
;;
esac
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index c2e994530d..105d4dbf8a 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -49,9 +49,9 @@ ath79_setup_interfaces()
pcs,cr3000|\
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
- ucidef_set_interface_wan "eth0"
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+ "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
buffalo,bhr-4grv|\
buffalo,wzr-hp-g450h)
@@ -62,7 +62,20 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
;;
- buffalo,wzr-hp-ag300h)
+ buffalo,whr-g301n)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
+ buffalo,wzr-hp-ag300h|\
+ tplink,tl-mr3220-v1|\
+ tplink,tl-mr3420-v1|\
+ tplink,tl-wr841-v7|\
+ tplink,tl-wr841-v9|\
+ tplink,tl-wr841-v11|\
+ tplink,tl-wr842n-v1|\
+ tplink,tl-wr842n-v3|\
+ ubnt,airrouter)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
@@ -71,15 +84,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
;;
- comfast,cf-e5|\
- glinet,gl-ar150|\
- glinet,gl-ar300m-nand|\
- glinet,gl-ar300m-nor|\
- glinet,gl-x750|\
- tplink,tl-wr810n-v1|\
- tplink,tl-wr810n-v2|\
- ubnt,routerstation|\
- yuncore,a770)
+ comfast,cf-e110n-v2|\
+ comfast,cf-e120a-v3|\
+ ubnt,nanostation-m|\
+ ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
devolo,dvl1200e|\
@@ -159,7 +167,12 @@ ath79_setup_interfaces()
;;
netgear,wnr612-v2|\
on,n150r|\
- tplink,tl-wr841-v7)
+ tplink,tl-wr740n-v1|\
+ tplink,tl-wr740n-v3|\
+ tplink,tl-wr741-v1|\
+ tplink,tl-wr743nd-v1|\
+ tplink,tl-wr841-v5|\
+ tplink,tl-wr941-v4)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
@@ -172,28 +185,6 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"
;;
- tplink,archer-c5-v1|\
- tplink,archer-c7-v1|\
- tplink,archer-c7-v2|\
- tplink,tl-wdr4900-v2)
- ucidef_add_switch "switch0" \
- "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
- ;;
- tplink,archer-d50-v1)
- ucidef_add_switch "switch0" \
- "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
- ;;
- buffalo,whr-g301n|\
- tplink,tl-mr3220-v1|\
- tplink,tl-mr3420-v1|\
- tplink,tl-wr841-v9|\
- tplink,tl-wr841-v11|\
- tplink,tl-wr842n-v3|\
- ubnt,airrouter)
- ucidef_set_interface_wan "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
tplink,archer-a7-v5|\
tplink,archer-c6-v2|\
tplink,archer-c7-v4|\
@@ -204,6 +195,17 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
+ tplink,archer-c5-v1|\
+ tplink,archer-c7-v1|\
+ tplink,archer-c7-v2|\
+ tplink,tl-wdr4900-v2)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
+ ;;
+ tplink,archer-d50-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
+ ;;
tplink,tl-wr1043nd-v1)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
@@ -217,37 +219,21 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
- tplink,tl-wr740n-v1|\
- tplink,tl-wr740n-v3|\
- tplink,tl-wr741-v1|\
- tplink,tl-wr743nd-v1|\
- tplink,tl-wr841-v5|\
- tplink,tl-wr941-v4)
- ucidef_set_interface_wan "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
- ;;
- tplink,tl-wr710n-v1)
- ucidef_set_interface_wan "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "3:lan"
- ;;
tplink,tl-wr740n-v4|\
tplink,tl-wr741nd-v4|\
tplink,tl-wr841-v8|\
- tplink,tl-wr842n-v1|\
tplink,tl-wr842n-v2)
- ucidef_set_interface_wan "eth0"
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+ "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
tplink,tl-wr941-v2)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
ubnt,acb-isp)
- ucidef_set_interface_wan "eth0"
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "0@eth1" "2:lan:1" "3:lan:3" "4:lan:2"
+ "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
;;
ubnt,routerstation-pro)
ucidef_set_interface_wan "eth0"
@@ -259,9 +245,9 @@ ath79_setup_interfaces()
"0@eth0" "5:lan" "1:wan"
;;
xiaomi,mi-router-4q)
- ucidef_set_interface_wan "eth0"
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "0@eth1" "3:lan:1" "4:lan:2"
+ "0@eth0" "3:lan:1" "4:lan:2"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"