aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/tiny
diff options
context:
space:
mode:
authorLech Perczak <lech.perczak@gmail.com>2020-05-29 20:50:05 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-31 15:44:05 +0200
commit7e513136c63108bf55b38be4d2b65aa00b0d2b26 (patch)
tree93f5cad2a831b01390601cc72ee64c106bc87729 /target/linux/ath79/tiny
parentf841e706403b1a111cbb6dc5930b7886307bf633 (diff)
downloadupstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.tar.gz
upstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.tar.bz2
upstream-7e513136c63108bf55b38be4d2b65aa00b0d2b26.zip
ath79: add support for TP-Link TL-WR802N V1 and V2
Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of Flash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to web interface: [V1] http://192.168.0.1 [V2] http://192.168.0.254 Default user is "admin" & password is "admin". On V2, there is no DHCP server running by default, so remember to set IP manually. - Go to "System Tools -> Firmware Upgrade" - Browse for firmware: [V1] "*.factory.bin" [V2] "*.factory-us.bin" or "*.factory-eu.bin" for eu model Web interface may complain if filename is too long. In such case, rename .bin to something shorter. - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Notes: When porting from ar71xx target to ath79, I found out that on V2, reset button is on GPIO12 and active low, instead of GPIO11 and active high. By cross-flashing V1 firmware to V2, I confirmed the same is true for V1. Also according to manual of V1, this one also has green LED instead of blue - both of those issues were fixed accordingly. The MAC address assignment has been checked with OEM firmware. Installation manual based on ar71xx support by Thomas Roberts Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [slightly adjust commit message, add MAC address comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/tiny')
-rwxr-xr-xtarget/linux/ath79/tiny/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration18
2 files changed, 21 insertions, 1 deletions
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index 5e559363b2..bff17bcce8 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -43,7 +43,9 @@ ath79_setup_interfaces()
tplink,tl-wa901nd-v2|\
tplink,tl-wa901nd-v4|\
tplink,tl-wa901nd-v5|\
- tplink,tl-wr703n)
+ tplink,tl-wr703n|\
+ tplink,tl-wr802n-v1|\
+ tplink,tl-wr802n-v2)
ucidef_set_interface_lan "eth0"
;;
tplink,tl-mr3220-v1|\
diff --git a/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration
new file mode 100644
index 0000000000..377135f530
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/uci-defaults/04_led_migration
@@ -0,0 +1,18 @@
+. /lib/functions.sh
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+boardonly="${board##*,}"
+
+case "$board" in
+tplink,tl-wr802n-v1)
+ migrate_leds ":blue:=:green:"
+ ;;
+tplink,tl-wr802n-v2)
+ migrate_leds "^$boardonly:=tp-link:"
+ ;;
+esac
+
+migrations_apply system
+
+exit 0