aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2021-02-17 01:29:44 +0100
committerDavid Bauer <mail@david-bauer.net>2021-02-20 01:26:33 +0100
commitd6b785d47739a84611088ab26256fa5808d06a9d (patch)
treed45ffa6e6182ce80ec35663de8c514888655e1b8 /target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
parentfb64e2c30f0cba887d3b183ce52de36b3e8bbb7e (diff)
downloadupstream-d6b785d47739a84611088ab26256fa5808d06a9d.tar.gz
upstream-d6b785d47739a84611088ab26256fa5808d06a9d.tar.bz2
upstream-d6b785d47739a84611088ab26256fa5808d06a9d.zip
ath79: add kernel 5.10 support
This adds Kernel 5.10 support for the generic, nand and tiny subtargets. The following patch is not contained, as it needs to be reworked: platform/920-mikrotik-rb4xx.patch Tested-on: - Siemens WS-AP3610 - Enterasys WS-AP3710 - Aerohive HiveAP 121 - TP-Link TL-WA901 v2 - TP-Link TL-WR741 v1 Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch')
-rw-r--r--target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch90
1 files changed, 90 insertions, 0 deletions
diff --git a/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch b/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
new file mode 100644
index 0000000000..bc09062dc5
--- /dev/null
+++ b/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
@@ -0,0 +1,90 @@
+From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Mon, 18 Mar 2019 00:54:06 +0100
+Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
+
+This adds missing GMAC register definitions for the Qualcomm Atheros
+QCA955X series MIPS SoCs.
+
+They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
+Repeater 450E's GPL tarball.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
+ 1 file changed, 54 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1246,7 +1246,12 @@
+ */
+
+ #define QCA955X_GMAC_REG_ETH_CFG 0x00
++#define QCA955X_GMAC_REG_SGMII_RESET 0x14
+ #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
++#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
++#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
++#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34
++#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
+
+ #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
+ #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
+@@ -1268,9 +1273,58 @@
+ #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
+ #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
+
++#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0
++#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
++#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
++#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
++#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
++#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
++
+ #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
+ #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
+ #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
++
++#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6)
++#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8)
++#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9)
++#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11)
++#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
++#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13)
++#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14)
++#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
++
++#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0)
++#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2)
++#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
++#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4)
++#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5)
++#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6)
++#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7)
++
++#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
++#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
++#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3)
++#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4)
++#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5)
++#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6
++#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0
++#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8)
++#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9)
++#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10)
++#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11)
++#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12)
++#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13)
++#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14)
++
++#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff
++#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0
++#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00
++#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8
++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000
++#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16
++#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000
++#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24
++
+ /*
+ * QCA956X GMAC Interface
+ */