ath79: Remove kernel 4.14 support

This target was switched to kernel 4.19 more than 6 months ago in commit
f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now
with kernel 5.4 support being added it gets harder to support kernel
4.14 in addition to kernel 4.19 and 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 27 deletions

diff --git a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch b/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
deleted file mode 100644
index cf05d0fc4a..0000000000
--- a/target/linux/ath79/patches-4.14/0038-at803x-disable-delays.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
-only for RGMII mode"), delays were not disabled on driver probe
-for the Atheros AR803x PHYs, although the RX delay is enabled on
-soft and hard reset.
-
-In addition, the TX delay setting is retained on soft-reset.
-
-This patch disables both delays on config init to align the behavior
-with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -320,6 +320,14 @@ static int at803x_config_init(struct phy
- 	if (ret < 0)
- 		return ret;
- 
-+	/* Disable RX delay */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+	/* Disable TX delay */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+
- 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
- 			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- 		ret = at803x_enable_rx_delay(phydev);