diff options
author | Thibaut VARÈNE <hacks@slashdirt.org> | 2022-04-14 12:39:03 +0200 |
---|---|---|
committer | Petr Štetiar <ynezz@true.cz> | 2022-04-15 08:14:50 +0200 |
commit | 708b883168e624ede9f5897a55e5e722c6881d76 (patch) | |
tree | aa0143297e317e82ebc1dbe32cfd047b90a10e69 /target/linux/ath79/modules.mk | |
parent | 65144c96eb7b987c1648b99fd3699ac5e948b52e (diff) | |
download | upstream-708b883168e624ede9f5897a55e5e722c6881d76.tar.gz upstream-708b883168e624ede9f5897a55e5e722c6881d76.tar.bz2 upstream-708b883168e624ede9f5897a55e5e722c6881d76.zip |
ath79: add support for Yuncore XD3200
Specification:
- QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR
- 2T2R 802.11b/g/n 2.4GHz
- 2T2R 802.11n/ac 5GHz
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
LED for 5 GHz WLAN is currently not supported as it is connected directly
to the QCA9882 radio chip.
Flash instructions:
If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):
fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin
In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:
1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
seconds, recovery mode should start downloading image from server
(unfortunately, there is no visible indication that recovery got
enabled - in case of problems check TFTP server logs)
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164)
Diffstat (limited to 'target/linux/ath79/modules.mk')
0 files changed, 0 insertions, 0 deletions