diff options
| author | David Musil <0x444d@protonmail.com> | 2022-04-16 12:01:31 +0000 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2022-04-18 07:24:09 +0200 |
| commit | e20de224427008e0f26161f924bc347d974fd15a (patch) | |
| tree | 95e531d29abceae8b6446726237c7a0f96a17d0c /target/linux/ath79/mikrotik | |
| parent | 7dc52a78ae2c2f748a0c0c4adcb13979260b3498 (diff) | |
| download | upstream-e20de224427008e0f26161f924bc347d974fd15a.tar.gz upstream-e20de224427008e0f26161f924bc347d974fd15a.tar.bz2 upstream-e20de224427008e0f26161f924bc347d974fd15a.zip | |
ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)
The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small
2.4 GHz 802.11b/g/n PoE-capable AP.
Specifications:
- SoC: Qualcomm Atheros QCA9533
- Flash: 16 MB (SPI)
- RAM: 64 MB
- Ethernet: 1x 10/100 Mbps (PoE in)
- WiFi: AR9531 2T2R 2.4 GHz (SoC)
- 3x green LEDs (1x lan, 1x wlan, 1x user)
See https://mikrotik.com/product/RBwAP2nD for more info.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d
The network setup avoids using the integrated switch and connects the
single Ethernet port directly. This way, link speed (10/100 Mbps) is
properly reported by eth0.
Signed-off-by: David Musil <0x444d@protonmail.com>
Diffstat (limited to 'target/linux/ath79/mikrotik')
3 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index ecc47e07c2..f5b927ea96 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -7,7 +7,8 @@ board=$(board_name) case "$board" in mikrotik,routerboard-lhg-2nd|\ -mikrotik,routerboard-mapl-2nd) +mikrotik,routerboard-mapl-2nd|\ +mikrotik,routerboard-wap-2nd) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; mikrotik,routerboard-lhg-5nd) diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 04bedfb569..999ce0dd99 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -19,6 +19,7 @@ ath79_setup_interfaces() mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" @@ -47,6 +48,7 @@ ath79_setup_macs() mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) label_mac="$mac_base" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 4701460cb6..800ce11d51 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -27,6 +27,7 @@ case "$FIRMWARE" in mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-lhg-5nd|\ mikrotik,routerboard-sxt-5nd-r2|\ + mikrotik,routerboard-wap-2nd|\ mikrotik,routerboard-wapr-2nd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1) ;; |