aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/mikrotik
diff options
context:
space:
mode:
authorRyan Mounce <ryan@mounce.com.au>2021-04-10 12:26:49 +0930
committerHauke Mehrtens <hauke@hauke-m.de>2022-04-19 21:45:46 +0200
commita15604568862cb21c2888f405652d81514d1bb95 (patch)
treebad4260037ddd27dac098e7d04b9cd40d26127f2 /target/linux/ath79/mikrotik
parent5d91b5a6368f14f559a283d757e4cda57261ab20 (diff)
downloadupstream-a15604568862cb21c2888f405652d81514d1bb95.tar.gz
upstream-a15604568862cb21c2888f405652d81514d1bb95.tar.bz2
upstream-a15604568862cb21c2888f405652d81514d1bb95.zip
ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)
This patch adds support for the MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) Specifications: - SoC: QCA9558 - RAM: 128 MB - Flash: 16 MB SPI - 2.4GHz WLAN: 3x3:3 802.11n on SoC - 5GHz WLAN: 3x3:3 802.11ac on QCA9880 connected via PCIe - Switch: 5x 1000/100/10 on QCA8337 connected via RGMII - SFP cage: connected via SGMII (tested with genuine & generic GLC-T) - USB: 1x type A, GPIO power switch - PoE: Passive input on Ether1, GPIO switched passthrough to Ether5 - Reset button - "SFP" LED connected to SoC - Ethernet LEDs connected to QCA8337 switch - Green WLAN LED connected to QCA9880 Not working: - Red WLAN LED Installation: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit c2140e32ce32b9cc60f7d408e20bdf45dce6a634)
Diffstat (limited to 'target/linux/ath79/mikrotik')
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
3 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
index 797d1bba1f..999ce0dd99 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -24,6 +24,10 @@ ath79_setup_interfaces()
mikrotik,routerboard-wapr-2nd)
ucidef_set_interface_lan "eth0"
;;
+ mikrotik,routerboard-962uigs-5hact2hnt)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+ ;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3bfcfcc461..800ce11d51 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -35,6 +35,9 @@ case "$FIRMWARE" in
mikrotik,routerboard-wap-g-5hact2hnd)
caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2)
;;
+ mikrotik,routerboard-962uigs-5hact2hnt)
+ caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7)
+ ;;
*)
caldata_die "board $board is not supported yet"
;;
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 31d4eeedbc..77cd47f6a0 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -12,6 +12,7 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
mikrotik,routerboard-921gs-5hpacd-15s|\
+ mikrotik,routerboard-962uigs-5hact2hnt|\
mikrotik,routerboard-wap-g-5hact2hnd)
caldata_sysfsload_from_file $wlan_data 0x5000 0x844
;;