aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/mikrotik/config-default
diff options
context:
space:
mode:
authorChristopher Hill <ch6574@gmail.com>2020-05-25 21:10:00 -0400
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-15 21:16:18 +0200
commitb7a8a5454226f34256c5d76480dda5abb1308395 (patch)
tree73e01cab13df38509f747e3dec442cf3442cfb7c /target/linux/ath79/mikrotik/config-default
parentfa70b3a4bbc65d372d735004d9df894bd1c89c81 (diff)
downloadupstream-b7a8a5454226f34256c5d76480dda5abb1308395.tar.gz
upstream-b7a8a5454226f34256c5d76480dda5abb1308395.tar.bz2
upstream-b7a8a5454226f34256c5d76480dda5abb1308395.zip
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
Diffstat (limited to 'target/linux/ath79/mikrotik/config-default')
-rw-r--r--target/linux/ath79/mikrotik/config-default6
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/config-default b/target/linux/ath79/mikrotik/config-default
index 94c63f82fb..ec34a7c143 100644
--- a/target/linux/ath79/mikrotik/config-default
+++ b/target/linux/ath79/mikrotik/config-default
@@ -2,16 +2,20 @@ CONFIG_AT803X_PHY=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_GPIO_LATCH=y
+CONFIG_GPIO_RB4XX=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_LEDS_RESET=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MFD_RB4XX_CPLD=y
CONFIG_MIKROTIK=y
CONFIG_MIKROTIK_RB_SYSFS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AR934X=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_RB4XX=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_ROUTERBOOT_PARTS=y
CONFIG_MTD_SPI_NAND=y
@@ -24,10 +28,12 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_NET_SWITCHDEV=y
+CONFIG_PCI_AR71XX=y
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_SPI_RB4XX=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y