ath79: add mikrotik subtarget

This commit creates the ath79/mikrotik subtarget in order to support
MikroTik devices based on Qualcomm Atheros MIPS SoCs.

MikroTik devices need a couple of specific features: the split MiNOR
firmware MTD format, which is not used by other devices, and the 4k
sector erase size on SPI NOR storage, which can not be added to the
ath79/generic and ath79/nand subtargets now.

Additionally, the commit moves the two MikroTik devices already in
the generic and nand subtargets to this new one.

Tested on the RB922 board and the wAP AC router.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

6 files changed, 162 insertions, 0 deletions

diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..ee795c7496
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+ath79_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	mikrotik,routerboard-922uags-5hpacd|\
+	mikrotik,routerboard-wap-g-5hact2hnd)
+		ucidef_set_interface_lan "eth0"
+		;;
+	*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	esac
+}
+
+ath79_setup_macs()
+{
+	local board="$1"
+
+	case "$board" in
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ath79_setup_interfaces $board
+ath79_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000000..f5f88484b5
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+. /lib/functions/mikrotik-caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath9k-eeprom-ahb-18100000.wmac.bin")
+	case $board in
+	mikrotik,routerboard-wap-g-5hact2hnd)
+		mikrotik_caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2)
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..6eb9a93b75
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+. /lib/functions/mikrotik-caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:00:00.0.bin")
+	case $board in
+	mikrotik,routerboard-wap-g-5hact2hnd)
+		mikrotik_caldata_extract "art" 0x5000 0x844
+		;;
+	esac
+	;;
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case $board in
+	mikrotik,routerboard-922uags-5hpacd)
+		mikrotik_caldata_extract "art" 0x5000 0x844
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac
diff --git a/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration
new file mode 100644
index 0000000000..1a7b371a99
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+boardonly="${board##*,}"
+
+case "$board" in
+mikrotik,*)
+	migrate_leds "^rb:=mikrotik:"
+	;;
+esac
+
+migrations_apply system
+
+exit 0
diff --git a/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh b/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh
new file mode 100644
index 0000000000..9c4016ee5d
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh
@@ -0,0 +1,21 @@
+# Copyright (C) 2019 Robert Marko <robimarko@gmail.com>
+# Copyright (C) 2019 Roger Pueyo Centelles <roger.pueyo@guifi.net>
+#
+# Helper function to extract MAC addresses and calibration data for MikroTik
+#
+
+mikrotik_caldata_extract() {
+	local part=$1
+	local offset=$(($2))
+	local count=$(($3))
+	local mtd
+	local erdfile="/lib/firmware/erd.bin"
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
+
+	rbextract -e $mtd $erdfile
+
+	dd if=$erdfile of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+		caldata_die "failed to extract calibration data from $mtd"
+}
diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..a568689536
--- /dev/null
+++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,35 @@
+# Copyright (C) 2011 OpenWrt.org
+
+PART_NAME=firmware
+
+REQUIRE_IMAGE_METADATA=1
+platform_check_image() {
+	return 0
+}
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv nandwrite'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_do_upgrade_mikrotik_nand() {
+	CI_KERNPART=none
+	local fw_mtd=$(find_mtd_part kernel)
+	fw_mtd="${fw_mtd/block/}"
+	[ -n "$fw_mtd" ] || return
+	mtd erase kernel
+	tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" -
+
+	nand_do_upgrade "$1"
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	mikrotik,routerboard-922uags-5hpacd)
+		platform_do_upgrade_mikrotik_nand "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}