aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/mikrotik/base-files/lib
diff options
context:
space:
mode:
authorChristopher Hill <ch6574@gmail.com>2020-05-25 21:10:00 -0400
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-15 21:16:18 +0200
commitb7a8a5454226f34256c5d76480dda5abb1308395 (patch)
tree73e01cab13df38509f747e3dec442cf3442cfb7c /target/linux/ath79/mikrotik/base-files/lib
parentfa70b3a4bbc65d372d735004d9df894bd1c89c81 (diff)
downloadupstream-b7a8a5454226f34256c5d76480dda5abb1308395.tar.gz
upstream-b7a8a5454226f34256c5d76480dda5abb1308395.tar.bz2
upstream-b7a8a5454226f34256c5d76480dda5abb1308395.zip
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
Diffstat (limited to 'target/linux/ath79/mikrotik/base-files/lib')
-rw-r--r--target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
index d2e43d404f..8d11cfc0ce 100644
--- a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh
@@ -31,6 +31,7 @@ platform_do_upgrade() {
local board=$(board_name)
case "$board" in
+ mikrotik,routerboard-493g|\
mikrotik,routerboard-922uags-5hpacd)
platform_do_upgrade_mikrotik_nand "$1"
;;