diff options
author | Thibaut VARÈNE <hacks@slashdirt.org> | 2022-04-15 13:17:53 +0200 |
---|---|---|
committer | Petr Štetiar <ynezz@true.cz> | 2022-04-16 14:48:45 +0200 |
commit | 2cc9ee8000597fe132071ec3ba6bf0ac9404ac94 (patch) | |
tree | bdf33f70a1800e67733d7bb61a649296671c36df /target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | |
parent | 06874171d125f0a69d6fb8cfd12213b7913d317e (diff) | |
download | upstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.tar.gz upstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.tar.bz2 upstream-2cc9ee8000597fe132071ec3ba6bf0ac9404ac94.zip |
ath79: add support for Yuncore A930
Specification:
- QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR
- 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN)
- 2T2R 802.11b/g/n 2.4GHz
Flash instructions:
If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):
fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin
In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:
1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
seconds, recovery mode should start downloading image from server
(unfortunately, there is no visible indication that recovery got
enabled - in case of problems check TFTP server logs)
Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry-picked from commit a05dcb07241aa83a4416b56201e31b4af8518981)
[switch to mtd-mac-address instead of nvmem-cells]
Diffstat (limited to 'target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom')
0 files changed, 0 insertions, 0 deletions