diff options
| author | Ryan Mounce <ryan@mounce.com.au> | 2021-04-10 12:26:49 +0930 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-04-19 21:45:46 +0200 |
| commit | a15604568862cb21c2888f405652d81514d1bb95 (patch) | |
| tree | bad4260037ddd27dac098e7d04b9cd40d26127f2 /target/linux/ath79/mikrotik/base-files/etc/board.d/02_network | |
| parent | 5d91b5a6368f14f559a283d757e4cda57261ab20 (diff) | |
| download | upstream-a15604568862cb21c2888f405652d81514d1bb95.tar.gz upstream-a15604568862cb21c2888f405652d81514d1bb95.tar.bz2 upstream-a15604568862cb21c2888f405652d81514d1bb95.zip | |
ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)
This patch adds support for the MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)
Specifications:
- SoC: QCA9558
- RAM: 128 MB
- Flash: 16 MB SPI
- 2.4GHz WLAN: 3x3:3 802.11n on SoC
- 5GHz WLAN: 3x3:3 802.11ac on QCA9880 connected via PCIe
- Switch: 5x 1000/100/10 on QCA8337 connected via RGMII
- SFP cage: connected via SGMII (tested with genuine & generic GLC-T)
- USB: 1x type A, GPIO power switch
- PoE: Passive input on Ether1, GPIO switched passthrough to Ether5
- Reset button
- "SFP" LED connected to SoC
- Ethernet LEDs connected to QCA8337 switch
- Green WLAN LED connected to QCA9880
Not working:
- Red WLAN LED
Installation:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
(cherry picked from commit c2140e32ce32b9cc60f7d408e20bdf45dce6a634)
Diffstat (limited to 'target/linux/ath79/mikrotik/base-files/etc/board.d/02_network')
| -rw-r--r-- | target/linux/ath79/mikrotik/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 797d1bba1f..999ce0dd99 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -24,6 +24,10 @@ ath79_setup_interfaces() mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" ;; + mikrotik,routerboard-962uigs-5hact2hnt) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" + ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; |