diff options
| author | Weijie Gao <hackpascal@gmail.com> | 2018-12-29 17:22:32 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-12-30 20:08:13 +0100 |
| commit | abc7ed2c58860fc1363129efbe9e8c60f81a802c (patch) | |
| tree | 972d250921df3ca509c8a98aa514a0e774c1e5b6 /target/linux/ath79/image | |
| parent | fd35c5b205e7583628472b607ee4eb41c6d1b6d5 (diff) | |
| download | upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.gz upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.tar.bz2 upstream-abc7ed2c58860fc1363129efbe9e8c60f81a802c.zip | |
ath79: add support for D-Link DIR-859 A1
Hardware spec of DIR-859 A1:
SoC: QCA9563
DRAM: 64MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9880
USB is supported on the PCB but not connected.
Flash instructions:
1. Upgrade the factory.bin through the factory web interface or the u-boot
failsafe interface.
The firmware will boot up correctly for the first time.
Do not power off the device after OpenWrt has booted. Otherwise the u-boot
will enter failsafe mode as the checksum of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
After upgrading completes the u-boot won't complain about the firmware
checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin, just
upgrade the factory.bin through the u-boot failsafe interface and then goto
step 2.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
[squash commits, use common seama recipes, sync factory image recipe
with ramips version]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ath79/image')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index b2f83ba58c..8dd5dab7ca 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2,6 +2,7 @@ include ./common-buffalo.mk include ./common-netgear.mk DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION +DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK define Build/cybertan-trx @echo -n '' > $@-empty.bin @@ -53,6 +54,23 @@ define Build/nec-fw mv $@.new $@ endef +define Device/seama + KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma + KERNEL_INITRAMFS := $$(KERNEL) | seama + IMAGES += factory.bin + SEAMA_MTDBLOCK := 1 + + # 64 bytes offset: + # - 28 bytes seama_header + # - 36 bytes of META data (4-bytes aligned) + IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs + IMAGE/sysupgrade.bin := \ + $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin := \ + $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE) + SEAMA_SIGNATURE := +endef + define Device/avm_fritz300e ATH_SOC := ar7242 DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E @@ -192,6 +210,17 @@ define Device/dlink_dir-835-a1 endef TARGET_DEVICES += dlink_dir-835-a1 +define Device/dlink_dir-859-a1 + $(Device/seama) + ATH_SOC := qca9563 + DEVICE_TITLE := D-LINK DIR-859 A1 + IMAGE_SIZE := 15872k + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct + SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859 + SUPPORTED_DEVICES += dir-859-a1 +endef +TARGET_DEVICES += dlink_dir-859-a1 + define Device/elecom_wrc-300ghbk2-i ATH_SOC := qca9563 DEVICE_TITLE := ELECOM WRC-300GHBK2-I |