aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/image
diff options
context:
space:
mode:
authorDavide Fioravanti <pantanastyle@gmail.com>2019-05-05 22:35:00 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 17:59:49 +0200
commitf5d2c91415a68f554815860d574145644fc31c16 (patch)
treee526274ac8f848615500c6d011c5bdb8be7c3cd1 /target/linux/ath79/image
parentc349cc5752165c65d4133374755f07fc30004e74 (diff)
downloadupstream-f5d2c91415a68f554815860d574145644fc31c16.tar.gz
upstream-f5d2c91415a68f554815860d574145644fc31c16.tar.bz2
upstream-f5d2c91415a68f554815860d574145644fc31c16.zip
ath79: add support for TP-Link Archer D50 V1
TP-Link Archer D50 v1 is a dual-band AC1200 router + modem. The router section is based on Qualcomm/Atheros QCA9531 + QCA9882. The "DSL" section is based on BCM6318 but it's currently not supported. Internally eth0 is connected to the Broadcom CPU. Router section - Specification: CPU: QCA9531 650/600/200 MHz (CPU/DDR/AHB) RAM: 64 MB (DDR2) Flash: 8 MB (SPI NOR) Wifi 2.4GHz: QCA9531 2T2R Wifi 5GHz: QCA9982 2T2R 4x 10/100 Mbps Ethernet 8x LED, 3x button UART header on PCB Known issues: DSL not working (eth0) (WIP) UART connection --------------- J2 HEADER (Qualcomm CPU) . TX . RX . GND O VCC J16 HEADER (Broadcom CPU) O VCC . GND . RX . TX The following instructions require a connection to the J2 UART header. Flash instruction under U-Boot, using UART ------------------------------------------ 1. Press any key to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d50-v1-squashfs-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Initramfs instruction under U-Boot for testing, using UART ---------------------------------------------------------- 1. Press any key to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d50-v1-initramfs-kernel.bin bootm 0x81000000 Restore the original firmware ----------------------------- 0. Backup every partition using the OpenWrt web interface 1. Download the OEM firmware from the TP-Link website 2. Extract the bin file in a folder (eg. Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin) 3. Remove the U-Boot and the Broadcom image part from the file. Issue the following command: dd if="Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin" of="Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin.mod" skip=257 bs=512 count=15616 4. Double check the .mod file size. It must be 7995392 bytes. 5. Flash it using the OpenWrt web interface. Force the update if needed. WARNING: Remember to NOT keep settings. 5b. (Alternative to 5.) Flash it using the U-Boot and UART connection. Issue below commands in the U-Boot: tftpboot 0x81000000 Archer_D50v1_0.8.0_1.3_up_boot(170223)_full_2017-02-24_09.37.45.bin.mod erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed default-state = "off", it's already the default, added pcie node, fixed typo]
Diffstat (limited to 'target/linux/ath79/image')
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk21
1 files changed, 21 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index a3e1708fe1..4a5bb93864 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -133,6 +133,27 @@ define Device/tplink_cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
+define Device/tplink_archer-d50-v1
+ ATH_SOC := qca9531
+ DEVICE_TITLE := TP-Link Archer D50 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ BOARDNAME := ARCHER-D50-V1
+ IMAGE_SIZE := 7808k
+ TPLINK_HWID := 0xC1200001
+ TPLINK_HWREV := 0x00000046
+ TPLINK_FLASHLAYOUT := 8Mqca
+ TPLINK_HWREVADD := 0x00000000
+ TPLINK_HVERSION := 3
+ KERNEL := kernel-bin | append-dtb | lzma
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | \
+ tplink-v2-header -s -V "ver. 1.0"
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := tplink-v2-image -s -V "ver. 2.0" | \
+ append-metadata | check-size $$$$(IMAGE_SIZE)
+ SUPPORTED_DEVICES += archer-d50-v1
+endef
+TARGET_DEVICES += tplink_archer-d50-v1
+
define Device/tplink_re350k-v1
$(Device/tplink-safeloader)
ATH_SOC := qca9558