aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/image/generic.mk
diff options
context:
space:
mode:
authorSebastian Schaper <openwrt@sebastianschaper.net>2020-12-01 22:34:34 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-02-09 13:10:33 +0100
commitdc4745da7a3900b5dcd9158d1b83c2cda1d1b9b8 (patch)
tree502edea49a41024d291b70c4fd65c2d11ac6b61b /target/linux/ath79/image/generic.mk
parent82032f350991af08a918f0fcaac81ff82e836d88 (diff)
downloadupstream-dc4745da7a3900b5dcd9158d1b83c2cda1d1b9b8.tar.gz
upstream-dc4745da7a3900b5dcd9158d1b83c2cda1d1b9b8.tar.bz2
upstream-dc4745da7a3900b5dcd9158d1b83c2cda1d1b9b8.zip
ath79: add support for D-Link DAP-3662 A1
Specifications: * QCA9557, 16 MiB Flash, 128 MiB RAM, 802.11n 2T2R * QCA9882, 802.11ac 2T2R * 2x Gigabit LAN (1x 802.11af PoE) * IP68 pole-mountable outdoor case Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Both ethernet ports are set to LAN by default, matching the labelling on the case. However, since both GMAC Interfaces eth0 and eth1 are connected to the switch (QCA8337), the user may create an additional 'wan' interface as desired and override the vlan id settings to map br-lan / wan to either the PoE or non-PoE port, depending on the individual scenario of use. So, the LAN and WAN ports would then be connected to different GMACs, e.g. config interface 'lan' option ifname 'eth0.1' ... config interface 'wan' option ifname 'eth1.2' ... config switch_vlan option device 'switch0' option vlan '1' option ports '1 0t' config switch_vlan option device 'switch0' option vlan '2' option ports '2 6t' Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> [add configuration example] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/image/generic.mk')
-rw-r--r--target/linux/ath79/image/generic.mk12
1 files changed, 12 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index d11cc28146..6eda757445 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -794,6 +794,18 @@ define Device/dlink_dap-3320-a1
endef
TARGET_DEVICES += dlink_dap-3320-a1
+define Device/dlink_dap-3662-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-3662
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15296k
+ DAP_SIGNATURE := wapac11_dkbs_dap3662
+endef
+TARGET_DEVICES += dlink_dap-3662-a1
+
define Device/dlink_dch-g020-a1
SOC := qca9531
DEVICE_VENDOR := D-Link