diff options
| author | 张鹏 <sd20@qxwlan.com> | 2020-10-16 12:42:15 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-17 20:17:59 +0200 |
| commit | 987d9028e12f37fcb3ca095efd6ffde6d7007469 (patch) | |
| tree | b70357d8e29e972ad31dcf12b974dd2d8154472b /target/linux/ath79/image/generic.mk | |
| parent | 27a7d071c0e0576eddeb641d1f68abe1b6205aee (diff) | |
| download | upstream-987d9028e12f37fcb3ca095efd6ffde6d7007469.tar.gz upstream-987d9028e12f37fcb3ca095efd6ffde6d7007469.tar.bz2 upstream-987d9028e12f37fcb3ca095efd6ffde6d7007469.zip | |
ath79: add support for Qxwlan E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9558)
- 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 4x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 3-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (JP5) and LEDs (J8) headers on PCB
Flash instruction:
1.Using tftp mode with UART connection and original LEDE image
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
to "firmware.bin" and place it in tftp server directory.
- Connect PC with one of LAN ports, power up the router and press
key "Enter" to access U-Boot CLI.
- Use the following commands to update the device to LEDE:
run lfw
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
2.Using httpd mode with Web UI connection and original LEDE image
- Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
- Connect PC with one of LAN ports,press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
leds flashing.
- Open your browser and enter 192.168.1.1,You will see the upgrade
interface, select "openwrt-ar71xx-generic-xxx-squashfs-
sysupgrade.bin" and click the upgrade button.
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig, whitespace adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/image/generic.mk')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 71dc261b2c..528a63f629 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1475,6 +1475,27 @@ define Device/qihoo_c301 endef TARGET_DEVICES += qihoo_c301 +define Device/qxwlan_e558-v2 + SOC := qca9558 + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E558 + DEVICE_PACKAGES := kmod-usb2 +endef + +define Device/qxwlan_e558-v2-16m + $(Device/qxwlan_e558-v2) + DEVICE_VARIANT := v2 (16M) + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += qxwlan_e558-v2-16m + +define Device/qxwlan_e558-v2-8m + $(Device/qxwlan_e558-v2) + DEVICE_VARIANT := v2 (8M) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += qxwlan_e558-v2-8m + define Device/qxwlan_e750a-v4 SOC := ar9344 DEVICE_VENDOR := Qxwlan |