diff options
| author | David Bauer <mail@david-bauer.net> | 2018-12-27 02:32:39 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2018-12-27 14:06:38 +0100 |
| commit | e67da3443168fa6b6727cd81a35d559be77d6b4c (patch) | |
| tree | 601ffc3a594a02a7e2102852e8c907aa26e69927 /target/linux/ath79/image/generic.mk | |
| parent | 1724d4e9ed7716a5444eca42adf045c2f3afc554 (diff) | |
| download | upstream-e67da3443168fa6b6727cd81a35d559be77d6b4c.tar.gz upstream-e67da3443168fa6b6727cd81a35d559be77d6b4c.tar.bz2 upstream-e67da3443168fa6b6727cd81a35d559be77d6b4c.zip | |
ath79: add support for devolo WiFi pro 1750c
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
There is also a Micro-B USB-port present but this only seems to be a
dummy as the circuit next to it is not present (at least in my unit).
It is also not mentioned in the devolo manual.
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/image/generic.mk')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index ef8cf170de..b2f83ba58c 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -146,6 +146,14 @@ define Device/devolo_dvl1200e endef TARGET_DEVICES += devolo_dvl1200e +define Device/devolo_dvl1750c + ATH_SOC := qca9558 + DEVICE_TITLE := devolo WiFi pro 1750c + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += devolo_dvl1750c + define Device/dlink_dir-825-b1 ATH_SOC := ar7161 DEVICE_TITLE := D-LINK DIR-825 B1 |