diff options
| author | Sven Eckelmann <sven@narfation.org> | 2020-11-23 13:41:34 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-22 19:11:50 +0100 |
| commit | 5fc28ef47959c1256f2553d507224bb481b08494 (patch) | |
| tree | 2b84e59d7b658d37c2f648590013638e51ddfb2d /target/linux/ath79/image/generic.mk | |
| parent | 727eebbad1b9dea91174ea675cb64ea13484f790 (diff) | |
| download | upstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.gz upstream-5fc28ef47959c1256f2553d507224bb481b08494.tar.bz2 upstream-5fc28ef47959c1256f2553d507224bb481b08494.zip | |
ath79: Add support for Plasma Cloud PA300
Device specifications:
* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
- eth0
+ Label: Ethernet 1
+ 24V passive POE (mode B)
+ used as WAN interface
- eth1
+ Label: Ethernet 2
+ 802.3af POE
+ builtin switch port 2
+ used as LAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'target/linux/ath79/image/generic.mk')
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 333420c827..935dee75d7 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1579,6 +1579,24 @@ define Device/pisen_wmm003n endef TARGET_DEVICES += pisen_wmm003n +define Device/plasmacloud_pa300-common + SOC := qca9533 + DEVICE_VENDOR := Plasma Cloud + DEVICE_PACKAGES := uboot-envtools + IMAGE_SIZE := 7168k + BLOCKSIZE := 64k + IMAGES += factory.bin + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE) + IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300 + IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata +endef + +define Device/plasmacloud_pa300 + $(Device/plasmacloud_pa300-common) + DEVICE_MODEL := PA300 +endef +TARGET_DEVICES += plasmacloud_pa300 + define Device/qihoo_c301 $(Device/seama) SOC := ar9344 |