diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-09 12:49:17 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-13 20:43:15 +0200 |
| commit | 7ef7dbaf7057da37afeefa3753bc4d0f0453e51f (patch) | |
| tree | a763282c8ae1f546776b0d2643e61b20e3f95cd3 /target/linux/ath79/generic | |
| parent | 488da882f5102e4283b4864e6180c2c7fb8f494a (diff) | |
| download | upstream-7ef7dbaf7057da37afeefa3753bc4d0f0453e51f.tar.gz upstream-7ef7dbaf7057da37afeefa3753bc4d0f0453e51f.tar.bz2 upstream-7ef7dbaf7057da37afeefa3753bc4d0f0453e51f.zip | |
ath79: add support for TP-Link TL-WPA8630 v1
This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79.
Specifications:
SoC: QCA9563
CPU: 750 MHz
Flash/RAM: 8 / 128 MiB
Ethernet: 3x 1G ports (QCA8337 switch)
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k)
Buttons, LEDs and network setup appear to be almost identical
to the v2 revision.
Powerline interface is connected to switch port 5 (Label LAN4).
Installation:
No "fresh" device was available for testing the factory image.
It is not known whether flashing via OEM firmware GUI is possible
or not. A discussion from 2018 [1] about that indicates a few
adjustments are necessary, but it is not clear whether those
are already implemented with the TPLINK_HEADER_VERSION = 2 or not.
Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be
changed to 0x86310001 to allow factory flashing.
[1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27
Recovery:
Recovery is only possible via serial.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic')
4 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 4f1b76a65a..32101ed5b0 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -297,6 +297,7 @@ tplink,tl-mr6400-v1) ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" ;; +tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ tplink,tl-wpa8630p-v2-int) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 01b083ddad..4195332ae2 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -294,6 +294,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2" ;; + tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ tplink,tl-wpa8630p-v2-int) # port 5 (internal) is the power-line port diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 37f1792fad..19e20c7d36 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -129,6 +129,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; + tplink,tl-wpa8630-v1) + caldata_extract "art" 0x5000 0x844 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1) + ;; tplink,tl-wr902ac-v1) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1) diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 0f68209c9b..2dcdf7b007 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -45,6 +45,10 @@ tplink,re355-v1) tplink,re450-v1) migrate_leds "re450:=tp-link:" ;; +tplink,tl-wpa8630-v1) + migrate_leds "^tl-wpa8630:=tp-link:" \ + ':wlan$=:wifi2g' ':wlan5$=:wifi5g' + ;; wd,mynet-n750) migrate_leds "wd:=mynet-n750:" ;; |