diff options
| author | Sven Eckelmann <sven@narfation.org> | 2020-11-23 13:41:34 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-22 19:11:50 +0100 |
| commit | 17e592049005f3f7e65429966b21b2d834f9c2f0 (patch) | |
| tree | acc4acc061923a61d4874d66bd39055bf0d7a985 /target/linux/ath79/generic | |
| parent | 5fc28ef47959c1256f2553d507224bb481b08494 (diff) | |
| download | upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.gz upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.bz2 upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.zip | |
ath79: Add support for Plasma Cloud PA300E
Device specifications:
* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
- eth0
+ Label: Ethernet 1
+ 24V passive POE (mode B)
+ used as WAN interface
- eth1
+ Label: Ethernet 2
+ 802.3af POE
+ builtin switch port 2
+ used as LAN interface
* 12-24V 1A DC
* external antennas
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'target/linux/ath79/generic')
3 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f868d8dc94..ac1fc4406d 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -150,6 +150,7 @@ ath79_setup_interfaces() comfast,cf-e314n-v2|\ compex,wpj531-16m|\ plasmacloud,pa300|\ + plasmacloud,pa300e|\ tplink,cpe210-v1|\ tplink,cpe220-v2|\ tplink,cpe220-v3|\ diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh index 68733ccf15..002f5f9668 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh @@ -45,7 +45,8 @@ platform_do_upgrade_dualboot_datachk() { # boot anymore to Linux until it was reflashed with ap51-flash. local next_boot_part="1" case "$(board_name)" in - plasmacloud,pa300) + plasmacloud,pa300|\ + plasmacloud,pa300e) primary_kernel_mtd=3 ;; *) diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 3ce273990f..98861685dc 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -50,7 +50,8 @@ platform_do_upgrade() { jjplus,ja76pf2) redboot_fis_do_upgrade "$1" linux ;; - plasmacloud,pa300) + plasmacloud,pa300|\ + plasmacloud,pa300e) PART_NAME="inactive" platform_do_upgrade_dualboot_datachk "$1" ;; |