treewide: remove "+" sign for increment with macaddr_add

Many people appear to use an unneeded "+" prefix for the increment
when calculating a MAC address with macaddr_add. Since this is not
required and used inconsistently [*], just remove it.

[*] As a funny side-fact, copy-pasting has led to almost all
    hotplug.d files using the "+", while nearly all of the
    02_network files are not using it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

2 files changed, 16 insertions, 16 deletions

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 08d9e017a7..62f2f1e8b4 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -40,7 +40,7 @@ case "$FIRMWARE" in
 	engenius,ecb1200|\
 	engenius,ecb1750)
 		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) +1)
+		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) 1)
 		;;
 	engenius,epg5000|\
 	iodata,wn-ac1167dgr|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a7986a98ec..b7cb2da8cd 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -15,7 +15,7 @@ case "$FIRMWARE" in
 	engenius,enstationac-v1|\
 	glinet,gl-x750)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
 		;;
 	avm,fritz1750e|\
 	avm,fritzdvbc)
@@ -79,15 +79,15 @@ case "$FIRMWARE" in
 	sitecom,wlr-7100|\
 	zyxel,nbg6616)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
 		;;
 	engenius,ews511ap)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
 		;;
 	glinet,gl-ar750)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
 		;;
 	nec,wg800hp)
 		caldata_extract "art" 0x5000 0x844
@@ -103,11 +103,11 @@ case "$FIRMWARE" in
 	openmesh,mr1750-v1|\
 	openmesh,mr1750-v2)
 		caldata_extract "ART" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
 		;;
 	openmesh,om5p-ac-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
 		;;
 	qihoo,c301)
 		caldata_extract "radiocfg" 0x5000 0x844
@@ -130,22 +130,22 @@ case "$FIRMWARE" in
 		;;
 	tplink,archer-d50-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) 2)
 		;;
 	tplink,archer-d7-v1|\
 	tplink,archer-d7b-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
 		;;
 	tplink,eap245-v1|\
 	tplink,re450-v2|\
 	tplink,re450-v3)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
 		;;
 	tplink,re355-v1|\
 	tplink,re450-v1)
@@ -154,7 +154,7 @@ case "$FIRMWARE" in
 		;;
 	tplink,tl-wpa8630-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
 		;;
 	esac
 	;;
@@ -162,7 +162,7 @@ case "$FIRMWARE" in
 	case $board in
 	sitecom,wlr-8100)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
 		;;
 	esac
 	;;
@@ -180,7 +180,7 @@ case "$FIRMWARE" in
 	comfast,cf-ew72|\
 	comfast,cf-wr752ac-v1)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
@@ -237,13 +237,13 @@ case "$FIRMWARE" in
 	tplink,tl-wpa8630p-v2.0-eu|\
 	tplink,tl-wpa8630p-v2.1-eu)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	tplink,eap245-v3)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		;;
 	yuncore,a782|\
 	yuncore,xd4200)