diff options
author | Peng Zhang <sd20@qxwlan.com> | 2020-10-14 15:47:35 +0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-15 18:52:39 +0200 |
commit | 5666ca913a879e499dabb7364fff5e080abe8819 (patch) | |
tree | b188891e5c559f722fc2f3e4b46d26d161a147bb /target/linux/ath79/generic | |
parent | dec4a028ab6bdc0235ecda26ac9ad7072caf6b09 (diff) | |
download | upstream-5666ca913a879e499dabb7364fff5e080abe8819.tar.gz upstream-5666ca913a879e499dabb7364fff5e080abe8819.tar.bz2 upstream-5666ca913a879e499dabb7364fff5e080abe8819.zip |
ath79: add support for Qxwlan E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction:
1.Using tftp mode with UART connection and original LEDE image
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
to "firmware.bin" and place it in tftp server directory.
- Connect PC with one of LAN ports, power up the router and press
key "Enter" to access U-Boot CLI.
- Use the following commands to update the device to LEDE:
run lfw
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
2.Using httpd mode with Web UI connection and original LEDE image
- Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
- Connect PC with one of LAN ports,press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
leds flashing.
- Open your browser and enter 192.168.1.1,You will see the upgrade
interface, select "openwrt-ar71xx-generic-xxx-squashfs-
sysupgrade.bin" and click the upgrade button.
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[cut out of bigger patch, alter use of DEVICE_VARIANT, merge case
in 01_leds, use lower case for v4]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic')
-rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index cc5a930531..0c130e329e 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -194,7 +194,9 @@ etactica,eg200) ucidef_set_led_netdev "lan" "LAN" "red:eth0" "eth0" ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33" ;; -glinet,gl-mifi) +glinet,gl-mifi|\ +qxwlan,e750a-v4-8m|\ +qxwlan,e750a-v4-16m) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02" ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ;; |