aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2019-11-07 21:36:02 -0600
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-22 11:41:27 +0100
commit20fdfe37d21f19901eec86ace8da0c083faa7ebc (patch)
tree407681d561a163b3c990dcb839876ceec3b64865 /target/linux/ath79/generic
parent5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21 (diff)
downloadupstream-20fdfe37d21f19901eec86ace8da0c083faa7ebc.tar.gz
upstream-20fdfe37d21f19901eec86ace8da0c083faa7ebc.tar.bz2
upstream-20fdfe37d21f19901eec86ace8da0c083faa7ebc.zip
ath79: add support for the TP-LINK WBS510 V1
This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Diffstat (limited to 'target/linux/ath79/generic')
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches1
3 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 5bb1d92a60..c914090cf9 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -176,6 +176,7 @@ tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
+tplink,wbs510-v1|\
tplink,wbs510-v2)
ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index dcc0b8be23..06e2ae4cc0 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -92,6 +92,7 @@ ath79_setup_interfaces()
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
+ tplink,wbs510-v1|\
tplink,wbs510-v2|\
ubnt,nanostation-m|\
ubnt,routerstation)
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
index 844b212152..967e2c7680 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -47,6 +47,7 @@ tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
+tplink,wbs510-v1|\
tplink,wbs510-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
;;