aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/generic
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-09-11 18:32:05 +0200
committerDavid Bauer <mail@david-bauer.net>2020-09-17 18:07:39 +0200
commitb7da0d294465d5ab8d923f3b8265ece0a5847ac3 (patch)
tree51f6e7712cdd3f7559181dfbc04d6eb8098afc71 /target/linux/ath79/generic
parentcaf727767ab5c8f8d884ef458c74726a8e610d96 (diff)
downloadupstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.tar.gz
upstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.tar.bz2
upstream-b7da0d294465d5ab8d923f3b8265ece0a5847ac3.zip
ath79: add support for Ubiquiti UniFi AP Pro
This adds support for the Ubiquiti UniFi AP Pro to the ath79 target. The device was previously supported on the now removed ar71xx target. SoC Atheros AR9344 WiFi Atheros AR9344 & Atheros AR9280 ETH Atheros AR8327 RAM 128M DDR2 FLASH 16M SPI-NOR Installation ------------ Follow the Ubiquiti TFTP recovery procedure for this device. 1. Hold down the reset button while connecting power for 10 seconds. 2. Transfer the factory image via TFTP to the AP (192.168.1.20) 3. Wait 2 minutes for the AP to write the firmware to flash. The device will automatically reboot to OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/generic')
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom1
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 40ea14fa9b..518ca6f91a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -371,6 +371,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2"
;;
+ ubnt,unifi-ap-pro)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan"
+ ;;
zbtlink,zbt-wd323|\
xiaomi,mi-router-4q)
ucidef_set_interface_wan "eth1"
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3983b1f8c0..88d43e25c4 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -98,6 +98,7 @@ case "$FIRMWARE" in
tplink,tl-wdr4300-v1-il|\
tplink,tl-wdr4310-v1|\
tplink,tl-wdr4900-v2|\
+ ubnt,unifi-ap-pro|\
winchannel,wb2000)
caldata_extract "art" 0x5000 0x440
;;